Re: WHAT HAPPENED ?????

On 29 Jun 2006 17:54:33 -0700, "LAKENUT" <JOENJUDY5@xxxxxxxxxxxx>
wrote:

I HAVE A 1987 SUPRA SUNSPORT INBOARD BOAT 351V8 WITH VELVET DRIVE
TRANS. BOAT WAS PULLING STRONG RUNNING GREAT WHEN A SUDDEN CRACK WAS
HEARD. ENGINE RUNS GOOD, PROP WILL NOT TURN SOUNDS LIKE SOMTHING BROKE
BETWEEN THE ENGINE AND TRANS. ANY IDEAL??

B O A T =

Break

Out

Another

Thousand

(possibly more in your case)

.

Relevant Pages

  • Re: Do any cars come with an AT drain plug.?
    ... So 2/3rds of your old trans fluid is still inside. ... That car also had an external trans filter along with an internal one. ... Once upon a time, TC's had drain plugs; you'd have a helper turn over the engine until you saw a drain plug, loosen it slightly, then have your helper rotate the engine another 180 degrees, and there'd be another plug there that you would remove to drain the TC. ... I'd collected all the parts to do this except the steering column when basically a whole mess of stuff happened, the car sat for a couple years, and eventually I traded it back to the guy I bought it from for a car that was more together. ...
    (rec.autos.driving)
  • Re: adding rowids to a fragd table
    ... I'm in a trans so I can lock the table in excluse to avoid blowing the ... But in order to be sure, please check the current log before the operation, the LTXHWM effective value, and the current log after the error. ... Assuming the engine is effectively consuming logical log space and as such is having a correct behavior you could do the following to solve the issue: ...
    (comp.databases.informix)
  • Re: Removing engine on Ford Aspire
    ... Well, its a manual trans. ... You can fiddle with different ways to avoid removing the axles, ... can support the engine with a crane from above to keep it as level as ...
    (rec.autos.tech)
  • Re: Caravan Transmission Replacement by DIY??
    ... I did some reading on supporting the engine with chains ... I have a floor jack and I plan to buy a trans lifting ...
    (rec.autos.makers.chrysler)
  • Re: metal fatigue
    ... it seems the engine was missing ... one of the dowel pins to align the trans. ... Unique problem caused by ...
    (rec.crafts.metalworking)