Re: stainless steel foil instead of copper for grounding Ham radio?

On Fri, 12 Oct 2007 09:51:03 -0400, Martin Baxter <baxter-m@xxxxxx>
wrote:

brucedpaige@xxxxxxxxx wrote:

On Thu, 11 Oct 2007 09:48:49 -0400, Martin Baxter <baxter-m@xxxxxx>
wrote:

Evan Gatehouse wrote:

Never seen this discussed before:

Could I use thin stainless steel foil instead of copper foil in the
bilge as a ground for a long wire (backstay antenna) ham radio setup?

Evan Gatehouse

You may get some electrolysis where your copper ground connects to the
foil, if you have any water in the bilge and it's saline you certainly
will. You'll probably end up with a fairly high resistance (bad)
connection in short order.

Cheers
Marty

Higher resistance then the connection to the stainless back stay?

Only if your backstay spends long periods of time submerged, but then
you'll probably have other larger problems. ;-)

Cheers
Marty

------------ And now a word from our sponsor ----------------------
For a quality mail server, try SurgeMail, easy to install,
fast, efficient and reliable. Run a million users on a standard
PC running NT or Unix without running out of power, use the best!
---- See http://netwinsite.com/sponsor/sponsor_surgemail.htm ----

To obtain capacitance coupling to the ocean the plate has only to be
below the external water line and I have not seen too many boats with
bilge water that high.

Further if the plate is only acting as the ground plane in an antenna
system then to avoid electrolyses the RF ground should be connected to
the plate through high voltage capacitors thus no DC current on the
plate.

If connections are made with proper tin plated wire and terminals
there is no reason that corrosion should be any more a problem then
with any other electrical systems mounted below the cabin sole.



Bruce in Bangkok
(brucepaigeATgmailDOTcom)
.

Relevant Pages

  • Re: (2008-06-16) NS-RFC: Party crashers...
    ... here when you order trays you'll get an assortment ... pulled the foil of the serving tray and dug in, ... two large breasts and loaded his plate with other things. ...
    (rec.food.cooking)
  • Re: (2008-06-16) NS-RFC: Party crashers...
    ... here when you order trays you'll get an assortment ... pulled the foil of the serving tray and dug in, ... two large breasts and loaded his plate with other things. ...
    (rec.food.cooking)
  • Re: stainless steel foil instead of copper for grounding Ham radio?
    ... Could I use thin stainless steel foil instead of copper foil in the ... if you have any water in the bilge and it's saline you certainly ...
    (rec.boats.cruising)
  • Re: Float switches
    ... Wirenuts buried in a blob of RTV keeps the pump wire connections just like ... If there's an antenna coax connector in the bilge, ... hardens, heat shrink it down hard to pressurize the RTV injection and let ... connection looks like you just made it....unless the plastic sheath of the ...
    (rec.boats.cruising)
  • Re: stainless steel foil instead of copper for grounding Ham radio?
    ... Could I use thin stainless steel foil instead of copper foil in the ... if you have any water in the bilge and it's saline you certainly ...
    (rec.boats.cruising)