Re: Bonding onto titanium
On 26 Nov, 12:49, sergio <serva...@xxxxxxxxxxx> wrote:
On 26 Nov, 12:15, Chalo <chalo.col...@xxxxxxxxx> wrote:
That seems like a job for a carbon-epoxy wrap.
Thanks Chalo.
Despite what one might think about it,
And here is another low temperature solution.
A silver wire wrap with just a bit of solder.
Or even a gold wire wrap, to have it uniquely precious!
Sergio
Pisa
.
Relevant Pages
- Re: ROM 01 battery replacement - twisting leads ok?
... Cut the current battery out leaving the longest leads, ... Over the years I have found that even wire wrap connections come loose unless they are just wrapped one and never removed. ... Solder is a quick and easy way to achieve this. ... contact pressure as long as the wrap is not disturbed. ...
(comp.sys.apple2) - Re: Personally I do not understand why people do similations of circuits that you can solder togeth
... I have done penty of wire wrap, these days I just use old peices of flat cable: ... I just solder the power lines on the board, ... I just lay out a 2-side or 4-side pcb ... The upper limit of this sort of thing is in the 5 GHz ballpark. ...
(sci.electronics.design) - Re: Seeking wirewrap prototyping board
... making sure that no solder ever crept onto the wrap area of the posts. ... The problem might be where to find these sockets with the long wrap ... here who used to do a lot of wire wrap. ...
(sci.electronics.design) - Re: Wire Wrap
... > I would like to wire wrap some small hobby circuits. ... > Also I saw a post that suggested wire wrap is obsolete. ... should take the same abuse as a solder joint while maintaining a good ... discrete components and just use the special sockets for ICs. ...
(sci.electronics.basics) - Re: Wire Wrap
... > I would like to wire wrap some small hobby circuits. ... > Also I saw a post that suggested wire wrap is obsolete. ... and it counts on the wire biting into the leads for good ... joint before the solder, so you can just tack solder the leads together. ...
(sci.electronics.basics) |
|
