Re: XT hub : to service or not ?



news.virgin.net wrote:
Hi,
I bought a wheel for my tourer with an XT hub after trashing many wheels
over the years and it's been wonderfull. The bearings are still completely
smooth and have no detectable play. The question is - should I bother to
replace bearings and grease ? It has done about 4000-5000miles, mosly on
road and is just over a year old. I understand that replaceing the bearings
on a free hub is more involved than on a free-wheel so I'm wondering if I
should bother until some play is detectable. I was on a ride a while back
with a guy who had XT hubs for touring and he said he hadn't touched them
for years.

Thanks in advance,

Bruce.



i'd leave it. you'll likely introduce more contaminants "cleaning" it than leaving it alone.
.



Relevant Pages

  • Re: Mavic Ksyrium SL durabilty
    ... pop a spoke on a Ksyrium, ... Not true on a wheel ... bearings under warranty- the best customer service story I have heard ... guts of a Mavic hub at your "local engineering supply". ...
    (rec.bicycles.tech)
  • Re: Wood man Bill free hub removal and maintenance
    ... but I fear some water penetration was inevitable. ... removing the wheel bearings and running oil through the freehub body. ... but given that a hub is under ...
    (rec.bicycles.tech)
  • Re: Re-drilling trailer hubs?
    ... Depending on the design of the hub, you may not be able to modify ... And don't forget the bearing housing diameter - the wheel inner hole ... way inboard will put undue loads on the axle bearings. ...
    (rec.crafts.metalworking)
  • Re: XT hub : to service or not ?
    ... The bearings are still completely ... on a free hub is more involved than on a free-wheel so I'm wondering if I ... should bother until some play is detectable. ...
    (rec.bicycles.tech)
  • Re: XT hub : to service or not ?
    ... I bought a wheel for my tourer with an XT hub after trashing many ... Great experiment--you'll discover that you need to build new wheel on ... wear evenly - the need for replacement bearings then being indicated by play ... servicing should take ten minutes. ...
    (rec.bicycles.tech)