Re: Adjusted my headset - too tight?
- From: Ken <uce@xxxxxxx>
- Date: Sun, 30 Apr 2006 18:46:05 +0000 (UTC)
"PJay" <pauldavis563@xxxxxxxxxxx> wrote in
news:ZoKdnUxUYo8xYMnZRVny0Q@xxxxxx:
Steering is silky smooth and the chap at the bike shop could detect no
play and noted the smooth steering and said that everything was fine but
the headset I have (Cane Creek S2 11/8th) has cartridge bearings which I
would imagine are harder to bind so I was wondering whether there is any
possibility that the headset is too tight and might damage something
All bicycle headsets are subject to premature wear if you overtighten them.
In general, you should tighten them as loose as possible without any
noticable play when you push or bounce the fork.
.
Relevant Pages
- Re: How critical is headset adjustment
... I tightened up the stem bolts and double checked play. ... be sure I took it along to the bike shop to be checked and was given ... mentioned a small ticking noise I'd noticed in the top headset cup. ... However I do feel a tad nervous about adjusting my headset again in ... (rec.bicycles.tech) - Re: Adjusting headset preload
... fiber fork with CF steerer tube on a frame with a King headset ... As loose as possible with zero play - there's probably about as much ... ground and frame held in a way where play can be felt. ... Lift the whole bike up without holding the fork/bars, ... (rec.bicycles.tech) - Re: How critical is headset adjustment
... I'm probably worrying overly and I'm sure that there is margin for error, ... small amount of play there? ... the bike shop to be checked and was given the ok. ... mentioned a small ticking noise I'd noticed in the top headset cup. ... (rec.bicycles.tech) - Re: How much play is normal from an aheadset?
... Is the headset free running after it's been tightened? ... All sorts of things could have caused this - loose fork crown race, badly fitted head cups, even a bearing race fitted upside down ... Get a good fit copper or aluminium tube and smack the bastard down until it's a good fit. ... I found the 'tapping around' method leaves it slightly '\', and this rocks as you steer and the whole thing develops play. ... (uk.rec.cycling) - How critical is perfect headset adjustment?
... re-adjusted the headset. ... I took care to check for the removal of all play ... Just to be sure I took it along to the bike ... However I do feel a tad nervous about adjusting my headset again in case I ... (uk.rec.cycling) |
|