Re: Rear derailleur initial cable tension

From: "Josh Hassol" <jhassol@xxxxxxx>
Date: 31 Jan 2006 08:00:36 -0800

Qui si parla Campagnolo wrote:
>
> I also use new inner wire and housing with a new rear der and make sure
> the under BB guide is clean.

Yup! Did that. Thanks.

.

References:
- Rear derailleur initial cable tension
  - From: Josh Hassol
- Re: Rear derailleur initial cable tension
  - From: Qui si parla Campagnolo

Prev by Date: Re: Rear derailleur initial cable tension
Next by Date: Re: Rear derailleur initial cable tension
Previous by thread: Re: Rear derailleur initial cable tension
Next by thread: Re: Rear derailleur initial cable tension
Index(es):
- Date
- Thread

Relevant Pages

Re: Shimano Cabling - Group Kit vs. Bulk Box
... These came with the group kit when the bike was new. ... says is Dura-ace housing. ... I am not a big fan of lubed cables as the lube just ... Also a good der inner wire, ...
(rec.bicycles.tech)
Re: Good Shifter and Brake Housing and Cable Cutters ?
... coordinate such that the inner cable & housing are cut together. ... For example, if you need 6 inches of inner wire slack, pull the wire back 6 ... inches before cutting through both. ...
(rec.bicycles.tech)
Re: Good Shifter and Brake Housing and Cable Cutters ?
... Simple diagonal cutters will make nice clean cuts if you ... coordinate such that the inner cable & housing are cut together. ... For example, if you need 6 inches of inner wire slack, pull the wire back 6 ... inches before cutting through both. ...
(rec.bicycles.tech)
Re: Good Shifter and Brake Housing and Cable Cutters ?
... coordinate such that the inner cable & housing are cut together. ... For example, if you need 6 inches of inner wire slack, pull the wire back 6 ... inches before cutting through both. ...
(rec.bicycles.tech)
Re: OK to use QBP derailer housing for Campy shift cables?
... Qui si parla Campagnolo wrote: ... QBP 5mm der housing is great stuff and will improve any older cablke housing set. ...
(rec.bicycles.tech)