Re: Comair Pilot Error

john smith wrote:


Consider the fact that many pilots do not even look at the tables in the POH/AOH.

What tables apply to leaning?


Additionally, they have no clue what the manufacturer recommended degrees rich/lean of peak to operate at max power or max range.
How much do you adjust the mixture after attaining roughness? A little? A lot? Just enough to smooth it out? That kind of adjustment can kill an engine quickly.

As long as they are below 75% power it doesn't really matter that much.
You haven't demosntrated any better knowledge of how to set the mixture
than the "leaning it until it roughens and then push it in a notch."
.

Relevant Pages

  • Re: Tech: Star Trek displays
    ... game) is the ball is not kicking out at game start, if I pull it, game ... Should I try to adjust it up from there? ... Or with power on, ... ~ Display pulling down voltage - Disconnect every display except one. ...
    (rec.games.pinball)
  • Re: Olympus SZ-60 focus
    ... Is there a "diopter adjust" collar on both of the eyepiece ... But if both sides are adjustable, you can probably use the eyepiece ... adjustments to make the image stay in focus as you zoom. ... highest power, and then adjust focus for best sharpness. ...
    (sci.techniques.microscopy)
  • Re: TECH: Meteor - lost my feature lights
    ... I can't believe I had just finished restoring my pin with new globes - ... Now you know for the future to not adjust stuff with the power on - valuable lesson learned. ... I think that's why WMS put the lockout switch on the machine, not to protect the operator, but so the boards didn't get blown up by adjusting with the power on ...
    (rec.games.pinball)
  • Re: Bandsaw: What do you recommend?
    ... Rikon for the 2 weeks that I had it had plenty of power but was no less ... adjust the 10 ceramic guides and start sawing. ...
    (rec.woodworking)
  • Re: CNN: Explores Possibility that Power Outage is Related to Internet Worm
    ... While I have bid on a power system network audit, ... plants) and adjust capacity by bringing plants on line or adjusting ... As an interesting factoid, in the directives list for power noc engineers, ...
    (Bugtraq)
Loading