Re: Lycoming to approve 93 octane auto gas for O-360 & IO-360

rotor&wing wrote:
Newps;641643 Wrote:
rotor&wing wrote:[color=blue][i]
Newps;639635 Wrote: [color=green][i]

But you're not going to run an IO-520 at 31 inches and 2300 rpm and get very many hours out of it.


OK, please provide the reference from the manufacturer backing this up.




The manufacturer? Are you shittin' me? Continental and Lycoming are the last people you go to to learn how to operate your engine correctly. This is basic stuff. Contact Walter Atkinson and George Braly for the details on what's going on inside your engine.
.

Relevant Pages

  • Re: Lycoming to approve 93 octane auto gas for O-360 & IO-360
    ... inches and 2300 rpm and get very many hours out of it. ... please provide the reference from the manufacturer backing this up. ...
    (rec.aviation.owning)
  • Re: Stanford professors and students against Rumsfeld
    ... But my real gripe with lawyers is what they have done to aviation and to ... The RPM can be set at 3000 and the ... manifold pressure can be anywhere between 15 inches ...
    (rec.aviation.military)
  • Re: usb turntables
    ... transcription disks ran at near 78 rpm, but had to be so large (like ... 16 inches in diameter) to be able to go for 15 minutes on one side. ...
    (microsoft.public.windowsxp.general)
  • Re: Machine Tapping
    ... that couldn't spin that fast with a bullet at the set-up dudes ... At 10,000 RPM, a 20 TPI tap would travel 8.33 inches per second. ...
    (rec.crafts.metalworking)
  • Re: Machine Tapping
    ... At 10,000 RPM, a 20 TPI tap would travel 8.33 inches per second. ... I feel the same, yet, the production world is fascinating. ...
    (rec.crafts.metalworking)