Re: 99 dodge intrepid fuel pump low voltage



caboose wrote:


On other thing that just hit me was that the relay is not cycling now.
Is there two separate power lines running to the pump? I think they
told me that one of the lines had a full 12 volts but the other only
had 8.5. How is the pump getting 8.5 volts if the relay is not
cycling?

There's only two wires to the pump. If one has 12v and the other 8.5v, then you have a bad ground.
.



Relevant Pages

  • Re: Convert ac to dc
    ... Pump is designed to run from 12 v to 16 v dc. ... using a smaller cap may do it. ... The output is 10.98 volts at 1.9 amps. ...
    (sci.electronics.basics)
  • Re: update
    ... The pump pumps way more liquid, ... supply that gives 17.5v on no load set to 12v! ... put a regulator circuit in the output so that 6 volts really is 6 ...
    (sci.electronics.basics)
  • Re: Generator for a well pump?
    ... You'd have to check your well pump. ... See if it's 110 volts or 220 volts. ... the toilet bowl holds down the stink, until you can get a real flush. ... take to supply power to just a well pump? ...
    (alt.home.repair)
  • Re: Corsa windscreen washer pump
    ... I've checked the fuse and it isn't blown. ... You need to check volts are getting to it when ... it's the pump? ... To e-mail, change noise into sound. ...
    (uk.rec.cars.maintenance)
  • Re: update
    ... The pump pumps way more liquid, ... Mount the LM317 on a small heat sink. ... The adapter will put out more than 9 volts with no ...
    (sci.electronics.basics)