Re: 2000 4.6l SOHC FORD IAC sensor problem



"Stan Weiss" <srweiss@xxxxxxxxx> wrote in message
> What is the best method you have found to clean an IAC sensor on a FORD
> 4.6l SOHC engine, or is it best to just replace it.

Try carb cleaner and a bristle brush. You might be better off replacing
it, but I'm cheap enough to clean it before investing the money.
--scott

--
"C'est un Nagra. C'est suisse, et tres, tres precis."
.



Relevant Pages

  • Re: Mixer Comparison between Mackie 1202 VLZ and Yamaha MG 124CX
    ... Both were easy to fix. ... Well, replacing the ribbon cable wasn't so easy, but doable. ... inserts and XLR outputs. ... C'est suisse, et tres, tres precis." ...
    (rec.audio.pro)
  • Re: Buzzing amp
    ... the amp is some 30 years old and has never been serviced, filter caps ... are a likely culprit. ... I'd begin by replacing those -- if they aren't ... C'est suisse, et tres, tres precis." ...
    (rec.audio.pro)
  • Re: Anyone Know what tubes a Cembalet takes?
    ... The tubes that need replacing in this Cembalet keyboard have their ... I'm pretty sure they are ECH81 and a ... C'est suisse, et tres, tres precis." ...
    (rec.audio.pro)
  • Re: Torn CV boot prognosis
    ... The mechanic said it wasn't possible to silicon it up ... to that of replacing the joint entirely. ... If you replace just the boot, ... C'est suisse, et tres, tres precis." ...
    (rec.autos.tech)