Re: '96 Cavalier 2.2l serp belt

And we are going to change water pump here??!!
<krinshaw876@xxxxxxxxx> wrote in message
news:1125422450.617814.312500@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
> What you need to do is to tighten the bolt back onto the tensioner &
> apply torque in the other direction...there is a spring behind it and
> that will put slack in the belt so that it will slip off.
>
>



----== Posted via Newsfeeds.Com - Unlimited-Uncensored-Secure Usenet News==----
http://www.newsfeeds.com The #1 Newsgroup Service in the World! 120,000+ Newsgroups
----= East and West-Coast Server Farms - Total Privacy via Encryption =----
.

Relevant Pages

  • Re: 96 Cavalier 2.2l serp belt
    ... > And we are going to change water pump here??!! ... >> What you need to do is to tighten the bolt back onto the tensioner & ... Thx ur help ... Prev by Date: ...
    (rec.autos.tech)
  • Re: 96 Cavalier 2.2l serp belt
    ... > And we are going to change water pump here??!! ... >> What you need to do is to tighten the bolt back onto the tensioner & ... changing the water pump is the name of the game... ... Prev by Date: ...
    (rec.autos.tech)
  • Re: Pictures -- installed Harbor Freight truck crane today
    ... shop crane to lift one side enough to slip the tubes under, ... the bed and bolt it back down. ... and lifting the bed to slip tubes under shouldn't be a big deal. ...
    (rec.crafts.metalworking)
  • Re: sts 120 mission end
    ... a nut or bolt in fact. ... You only need a tool to slip at high torque. ...
    (sci.space.shuttle)
  • Re: 96 Cavalier 2.2l serp belt
    ... > that will put slack in the belt so that it will slip off. ... angled-head ratchet box end over the bolt head on the idle/tension pulley, ... tightened it up and kept on going with the torque and it put enough slack in ...
    (rec.autos.tech)