Re: 2001 Jetta diesel timing?



Didn't you use the correct tools and lock everything into place before
removing the belt? If you didn't, you're screwed. Have it towed to the
dealer before you destroy the engine. If it's off by only one tooth, the
first revolution will destroy the engine. And once it IS put back together,
you'll need a Vag-com to set the injection timing anyway.

"dodgeram1998" <none@xxxxxxx> wrote in message
news:1203771_553865bd87e668b25d3ac34c3c3bae59@xxxxxxxxxxxxxxxxx
I found the timing marks on the flywheel. I found the marks on the
cam. I don't understand where the marks on the cam should line up.
And i can't find anything for timing the inj. pump. Please help me.
:?:

--
Posted at author's request, using moderated http://www.AutoBoardz.com
interface
Thread archive:
http://www.AutoBoardz.com/2001-Jetta-diesel-timing-ftopict247480.html


.



Relevant Pages

  • Re: 2001 Jetta diesel timing?
    ... first revolution will destroy the engine. ... you'll need a Vag-com to set the injection timing anyway. ... I don't understand where the marks on the cam should line up. ...
    (rec.autos.makers.vw.watercooled)
  • Re: 2001 Jetta diesel timing?
    ... first revolution will destroy the engine. ... I don't understand where the marks on the cam should line up. ... And i can't find anything for timing the inj. ...
    (rec.autos.makers.vw.watercooled)
  • Re: 2001 Jetta diesel timing?
    ... only a fool would do it without the correct tools. ... first revolution will destroy the engine. ... you'll need a Vag-com to set the injection timing anyway. ... I don't understand where the marks on the cam should line up. ...
    (rec.autos.makers.vw.watercooled)
  • Re: 1914cc Fast Engine!
    ... American engine builders are generally afraid of two ... Cam duration, and compression ratio. ... heads, even fairly cheap ones. ... He said all is stock. ...
    (rec.autos.makers.vw.aircooled)
  • Re: How to tell intake and exhaust valve with the intake manifold on?
    ... Any cam you find in the junk yard for this engine will be either like ... Big job if you DIY unless you're half machinist and have a good shop. ... A valve went bad so I pulled the heads, ...
    (rec.autos.tech)