Re: 34 pict-3 to Bocar 30/31



Yap, I'm from Portugal. its a DP and the Bocar came with and adaptor
for it bolted on. that way SPs can unbolt the adaptor and use it too.

But my question remains: does the 30/31 gives me better millage? or
did Ijust lost power with no benefits?

Thanks! :)

In article <Lk2Pi.11904$JD.453@xxxxxxxxxxxxxxxxxxxxxxxxxx>
"Karl"<aufever@xxxxxxxxxxx> wrote:
I believe Macsoft's mail ends in .pt so does that mean he is in
Portugal?

That would explain the '70 1300 bug.....

"Jan" <bugfuel@xxxxxxxxxxxxxx> wrote in message
news:5n3otnFfv1smU1@xxxxxxxxxxxxxxxxxxxxx

Europe got tons of 1300 dual ports with the smaller carb. 1600's
were a rare luxury, only found in Supers and not even all of them :)

Jan

Karl wrote:
> Throttle bore size.
>
> How did he bolt a 30/31 on a 34 intake?? He must have used an
adaptor
since
> the stud spacing is larger on a 34....
>

http://www2.cip1.com/ProductDetails.asp?ProductCode=VWC%2D113%2D129%2D
029%2DKIT
>
> 30/31 are normally on single ports.
> 34's are normally on dual ports.
>
> I have heard but never seen, a dual port center section with the
smaller > 30/31 bolt pattern.
>
>
> "Michael Cecil" <macecil@xxxxxxxxx> wrote in message
> news:n5rng35jl3kvpqtiahj1nfq2o1ptt8md4f@xxxxxxxxxx
>
>>On 09 Oct 2007 19:01:30 GMT, Macsoft <mailprivado@xxxxxxxxxx>
wrote: >>
>>
>>>Hi,
>>>Finally changed from my banged up original 34 pict-3 carburator
to the >>>brazilian equivalent, a Bocar 30/31. Now all is fine, the
car died at >>>idle before, probably lots of air was entering lots
of places and my >>>problem is fixed, finally!
>>>
>>>I have noticed a power loss do. I have been reading about this
carb, >>>and it seems to do better millage. good, becouse my gas
budget aint >>>that hi, and I like to drive the car daily. does this
carb trades >>>power for millage? If it does is a good thing for me,
but if it just >>>has less power and no benefitsI would like to
know. >>>
>>>Thanks,
>>>
>>>MM
>>>'70 1300 bug
>>
>>I don't know much about carbs. What exactly do the 34 and 30/31
refer
to?
>>Some kind of volume size that limits the power perhaps?


--

I'm trying a new usenet client for Mac, Nemo OS X.
You can download it at http://www.malcom-mac.com/nemo

.



Relevant Pages

  • Re: 34 pict-3 to Bocar 30/31
    ... Europe got tons of 1300 dual ports with the smaller carb. ... I have noticed a power loss do. ... and it seems to do better millage. ...
    (rec.autos.makers.vw.aircooled)
  • Re: 34 pict-3 to Bocar 30/31
    ... Europe got tons of 1300 dual ports with the smaller carb. ... I have noticed a power loss do. ... and it seems to do better millage. ...
    (rec.autos.makers.vw.aircooled)
  • Re: 34 pict-3 to Bocar 30/31
    ... How did he bolt a 30/31 on a 34 intake?? ... 34's are normally on dual ports. ... I have noticed a power loss do. ... I have been reading about this carb, ...
    (rec.autos.makers.vw.aircooled)
  • Re: 34 pict-3 to Bocar 30/31
    ... Europe got tons of 1300 dual ports with the smaller carb. ... I have noticed a power loss do. ... and it seems to do better millage. ...
    (rec.autos.makers.vw.aircooled)
  • Re: inductive or resistive load
    ... I'm trying to make a board for controlling AC loads. ... able of swithing on/off the AC power supply. ... adaptor, assuming that the total consumption of the equipment that it ...
    (sci.electronics.basics)