Re: Removing Timing Drive Pulley, 93 Civic

Yes, the seal is leaking. The crank pulley bolt is off. The timing belt
is also off. I am working off the steps in the Honda shop manual, and
it very simply states to remove the timing drive pulley. It make it
sound so simple! I have tried a pull tool, but can only get one lever
behind the sprocket.

Thanks for any guidance.


TeGGeR® wrote:
davidkatzen@xxxxxxxxxxx wrote in news:1156642106.690824.61010@
75g2000cwc.googlegroups.com:

Hi all:

I am on my way to replace the crank oil seal in my 93 Civic, but have
hit a snag. I can't get the timing belt drive pulley off. This pulley
sits behind the large crankshaft pulley. Does anyone have any tricks to
removing it? I've tried prying on the plate that sits behind it, but
that doesn't work. Should it be this hard?





Have you removed the crank pulley bolt? That's #1. Then the timing belt has
to come off. Plus a few more things...


--
TeGGeR®

The Unofficial Honda/Acura FAQ
www.tegger.com/hondafaq/

.

Relevant Pages

  • Re: Hey!!!!
    ... >> timing belt broke, and I am following the steps to replace it but I ... >> can't figure out how to remove the crankshaft pulley. ... and I broke my good screwdriver. ... Vintage Burgundy w/Black Standard Interior; ...
    (rec.autos.makers.ford.mustang)
  • Re: screeching noise on corolla with 7a-fe engine
    ... It is probably hidden under the timing belt cover, ... It's not the same thing as an accessory belt pulley! ... sprocket and the cam shaft sprocket very carefully before disassembling, ...
    (rec.autos.tech)
  • Re: Removing Timing Drive Pulley, 93 Civic
    ... different oils cause different leak rates. ... I can't get the timing belt drive pulley off. ...
    (rec.autos.makers.honda)
  • "Finished" Low speed mod to Sieg C6B
    ... I was going to use timing belt and cutting ... Poly-V belt made that problem go away. ... This is the new bottom end pulley to drive the countershaft and increase the ... Next step is the electronics, because I used 60 holes, I can use a bench ...
    (uk.rec.models.engineering)
  • Re: changing timing belt on 88 Jetta SOHC -- cant get crank pulley off
    ... You don't have to remove that big center bolt. ... Just tap the pulley with a plastic hammer. ... I got the top half of the timing belt cover off, ... off the bottom half of the plastic timing belt cover, ...
    (rec.autos.makers.vw.watercooled)