Re: D16 << Cylinder head STUCK to block
- From: scott <scott@xxxxxxxxxxxxxxxxx>
- Date: Fri, 14 Apr 2006 01:30:50 GMT
"'Curly Q. Links'" <motsco__@xxxxxxxxxxxxx> wrote in
news:443DDC85.63AD88DD@xxxxxxxxxxxxx:
Crystal wrote:
I removed all head studs, belts and even removed the cam and the head
still won't come off. I even went as far as beating it with a plastic
mallet - doesn't move a hair. Removed still the entire intake manifold
with no progress. Sprayed the hell out of the seam with PB blaster. Not
breaking free. Any ideas?
----------------------------------
If the valves are all closed anyway (can't collide with anything),
wouldn't SPINNING it over pop that sucker off, or just crack it in
half? :-(
'Curly'
That worked just fine for me on an old 2000 cc Pinto engine, but I would
suggest putting in a few head bolts loosely so the head won't come off and
land on something expensive.
Scott
.
- Follow-Ups:
- Re: D16 << Cylinder head STUCK to block
- From: 'Curly Q. Links'
- Re: D16 << Cylinder head STUCK to block
- References:
- D16 << Cylinder head STUCK to block
- From: Crystal
- Re: D16 << Cylinder head STUCK to block
- From: 'Curly Q. Links'
- D16 << Cylinder head STUCK to block
- Prev by Date: Re: The FIT is a 2002 Civic Si redesigned...
- Next by Date: S2000 OEM Radio
- Previous by thread: Re: D16 << Cylinder head STUCK to block
- Next by thread: Re: D16 << Cylinder head STUCK to block
- Index(es):
Relevant Pages
|
Loading