Re: Alternator replacement -- problem

On Tue, 02 Aug 2005 13:57:13 -0500, WindsorFox[SS] rearranged some
electrons to form:

> David M wrote:
>
>>
>> ??? He said the alt. light was on all the time, and no one has
>> measured the voltage at the output.
>>
>
> Which is why nothing he has said indicates it needs to be replaced.
> The output needs to be tested first.

You are mighty right.
Mike, you need to get somebody with a VOLTMETER to measure the
output voltage of the alternator at slow and fast engine speeds.


--
David M (dmacchiarolo)
http://home.triad.rr.com/redsled
T/S 53
sled351 Linux 2.4.18-14 has been up 4 days 22:30

.

Relevant Pages

  • Re: UPS Advice
    ... suggested I get a UPS with automatic voltage regulation. ... Are you seriously suggesting that the original poster is supposed ... documentation, David? ...
    (alt.comp.hardware.pc-homebuilt)
  • Re: UPS Advice
    ... david wrote: ... suggested I get a UPS with automatic voltage regulation. ... Are you suggesting that UPS/AVR combinations are a poor design? ...
    (alt.comp.hardware.pc-homebuilt)
  • Re: Sansui 7070 Power Amp Question
    ... I checked this voltage and it appears to be OK ... David Farber wrote: ... >> symptom is the speaker protection circuit is activated all the time. ... >> the output of BOTH channels. ...
    (sci.electronics.repair)
  • Re: power supply design
    ... "David L. Jones" wrote: ... 5V constant DC voltage ... can u suggest any ICs which are stable and rugged enough ...
    (sci.electronics.design)
  • Re: Sansui 7070 Power Amp Question
    ... I checked this voltage and it appears to be OK ... > David Farber wrote: ... >>> the output of BOTH channels. ... Check the collectors of the NPN output transistors. ...
    (sci.electronics.repair)