Re: Tube amp with 2.5 Ohm speakers??



Iain Churches wrote:

"Andre Jute" <fiultra@xxxxxxxxx> wrote
"Iain Churches" <Iai...@xxxxxxxxxxx> wrote:

I have been asked about using a tube amp with
low impedance speakers (2.5 Ohms)

Well, you might not find a transformer with precisely the PPP primary
ratio to match whatever you would have used for PP. Some of us might
even sacrifice some of the greater power to up the primary to plate
multiple for greater silence.

Indeed:-)
I have built some PPP amps before, and the primary Z was
half that of the PP version.

You've got me there. PPP ? What's the extra P for ?

Graham

.

Relevant Pages

  • Re: Tube amp with 2.5 Ohm speakers??
    ... low impedance speakers ... This doesn't seem like a big deal if you are specifying the output ... amplifier that doesn't include an output transformer with a 2.5 Ohm ... to give the additional 2.5 Ohms option. ...
    (rec.audio.tubes)
  • Re: Tube amp with 2.5 Ohm speakers??
    ... low impedance speakers (2.5 Ohms) ... you might not find a transformer with precisely the PPP primary ... ratio to match whatever you would have used for PP. ...
    (rec.audio.tubes)
  • Re: Very small step-up transformers?
    ... impedance ratio. ... 3:1 voltage step-up with a 4:1 impedance ratio transformer. ... worse fast...1000 ohms at 20mA is 0.4 watts, ...
    (sci.electronics.design)
  • Re: Tube amp with 2.5 Ohm speakers??
    ... low impedance speakers (2.5 Ohms) ... amplifier that doesn't include an output transformer with a 2.5 Ohm ... I have a Velleman K4000 PPP amp which ...
    (rec.audio.tubes)
  • Re: Tube amp with 2.5 Ohm speakers??
    ... low impedance speakers (2.5 Ohms) ... you might not find a transformer with precisely the PPP primary ... ratio to match whatever you would have used for PP. ... Two parallel pairs per channel. ...
    (rec.audio.tubes)