Re: What value pot?
- From: "bg" <NotValid@xxxxxxxxx>
- Date: Sat, 3 May 2008 13:33:03 -0600
---MIKE--- wrote in message
<8186-481CAB79-425@xxxxxxxxxxxxxxxxxxxxxxxxxxxx>...
My new digital FM tuner puts out too strong a signal compared to my
other inputs (TV and CD). I want to install a dual pot between the
tuner and preamp to reduce the volume. What is the best value pot to
use for this. I have ordered 50K, 100K, 250K and 500K from Mouser (the
pots are cheap - the shipping is not).
---MIKE---
Probably anything from 1k to 10k would be typical. It's not rocket science.In the White Mountains of New Hampshire
(44° 15' N - Elevation 1580')
The 50k should work fine too. You might find that a cheap pot won't track
very well between the left and right channels. You could always add a simple
resistive voltage divider and heat shrink it right into the cable.
bg
In the rocky mountains about 4500 feet
.
- References:
- What value pot?
- From: ---MIKE---
- What value pot?
- Prev by Date: Re: Toyo 6A Fuse...what voltage ?
- Next by Date: Re: What's the use of a 192 kHz sample rate?
- Previous by thread: What value pot?
- Next by thread: Re: What value pot?
- Index(es):
Relevant Pages
|
