Re: Inexpensive stereo recorder?

On Oct 25, 1:15 pm, "Arny Krueger" <ar...@xxxxxxxxxx> wrote:
M-Audio Microtrack 2496 (now in its first minor revision as the 2496 II) ...
provides true 48 V phantom power for condensers.

Have you measured its phantom power? The one I measured put out about
34 Volts, not 48. That's good enough to drive most condensor mics,
though some mics may not work or may not provide their full rated
sensitivity.

.

Relevant Pages

  • Re: Fishman Loudbox 100 and Phantom power?
    ... being released - the AG-50DS4 that now has phantom power, ... that it needs 48 volts, or would I still need to buy an additional ... most condensor mics seem to require 48v phantom ... Has anybody here used this amp with a condensor mic using the ...
    (rec.music.makers.guitar.acoustic)
  • Re: Fishman Loudbox 100 and Phantom power?
    ... I just learned of an updated Ultrasound amp ... being released - the AG-50DS4 that now has phantom power, ... that it needs 48 volts, or would I still need to buy an additional ... most condensor mics seem to require 48v phantom ...
    (rec.music.makers.guitar.acoustic)
  • Re: Inexpensive stereo recorder?
    ... provides true 48 V phantom power for condensers. ... 34 Volts, not 48. ... That's good enough to drive most condensor mics, ...
    (rec.audio.tech)
  • Re: Fishman Loudbox 100 and Phantom power?
    ... most condensor mics seem to require 48v phantom ... and the Fishman only puts out 24v phantom power. ... And since you're currently looking for an acoustic amp, I'll plug the Fishman: I've had my Loudbox 100 since June, and can't say enough good about it. ... Best reasonably-priced acoustic guitar amp I've ever played through. ...
    (rec.music.makers.guitar.acoustic)
  • Re: Adapting a microphone to remote phantom power
    ... I'm not aware of any tube based condensor mics that used phantom power as we ... They usually had dedicated multipole connectors rather than the ...
    (sci.electronics.repair)