Re: Resistor Question


"Mark D" <mmd49@xxxxxxxxx> wrote in message
news:25135-43F7A5EC-939@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Hi all, forgive my lack of electronic knowledge.

My question is, running in parallel with a 47K ohm resistor in a phono
stage, what value-final resistance does the addition of these particular
resistors now give?
1k ohm?
200 ohm?
100 ohm?
Thank you, Mark


Effectively,

1 kOhm

200 Ohm

100 Ohm

The 47 K in parallel with these is so much larger the small value resistors
predominate. No calculator necessary.

Mark Z.


.

Relevant Pages

  • Re: BJT Pair for Push-Pull, 1W, 33V, 200mA, 1MHz (& maybe no heatsink)?
    ... I had to play with the 806 Ohm split bias resistors' values, ... V), another design could do the power but had 15 nS to 20 nS edges, and i ...
    (sci.electronics.design)
  • Re: Don Kellys pentagon problem
    ... I say it ends up with two one ohm resistors and one two ohm resistor ... But I'm not much for puzzles and hey, this is a PHYSICS group, not ... it is a mathematical model and the physics involved is no more than Kirchoff's and Ohm's laws-mathematical expressions of what is observed. ...
    (sci.physics.electromag)
  • Re: Tech Help - Earthshaker Interconnect Board Photos Needed
    ... ohm resistors all reading in the high 7 ohm range, ... J9-2 - N/C ...
    (rec.games.pinball)
  • Re: BJT Pair for Push-Pull, 1W, 33V, 200mA, 1MHz (& maybe no heatsink)?
    ... It's awkward to mentally reconstruct your circuit description. ... I had to play with the 806 Ohm split bias resistors' values, ... As far as the load impedance, it could be virtually anything; ...
    (sci.electronics.design)
  • Mean value
    ... when the conjoint density of the random variables ... I two resistors of r1 and r2 ohm are connected ... in full accordance with the integration. ...
    (sci.stat.math)