Re: Behringer Eurodexk MX3282 fader problem

gareth magennis <gareth.magennis@xxxxxxxxxxxx> wrote:
It particularly happens when the fader housing is screwed to the front
panel. Push hard on the knob and you push the track out through the housing
because the circuit board flexes. Often you will find 2 or more adjacent
faders with the same problem because something big and heavy hit more than 1
fader knob, or the flexing board just pulled more than one fader apart. You
can just carefully put the track back and bend back the securing tabs.

This is horrifying. This is a strong argument to replace the board too...
if the faders are so poorly built that they do this, they will do it again
in the future.

Even the crappy Panasonic and Alps ones don't do this.
--scott
--
"C'est un Nagra. C'est suisse, et tres, tres precis."
.