Re: Mono to Stereo in one cable
- From: kludge@xxxxxxxxx (Scott Dorsey)
- Date: 12 Jul 2007 09:28:42 -0400
In article <46959312.8010905@xxxxxxxxxxxx>, Marty <Marty@xxxxxxxxxxxx> wrote:
You can use a twisted pair Balun. They are intended for CAT5 cable, but
for 40 feet, it will probably be fine with the pair inside a mic cable.
One such device will carry two channels of S/PDIF digital audio over a
single twisted pair. It costs a whopping $88.00/set.
Canare even makes some with XLR connectors on them, which also allow you
to plug S-PDIF outputs into AES/EBU interfaces (or vice versa) (if the
device will handle the different subcode format, ie. it's not a Panasonic).
--scott
--
"C'est un Nagra. C'est suisse, et tres, tres precis."
.
- References:
- Mono to Stereo in one cable
- From: reverbtime
- Re: Mono to Stereo in one cable
- From: Mike Rivers
- Re: Mono to Stereo in one cable
- From: reverbtime
- Re: Mono to Stereo in one cable
- From: Marty
- Mono to Stereo in one cable
- Prev by Date: Re: Need Some Inspiration
- Next by Date: Re: Why use tubes instead of Solid State?
- Previous by thread: Re: Mono to Stereo in one cable
- Next by thread: Re: Mono to Stereo in one cable
- Index(es):
Relevant Pages
|
Loading