Re: Ribbon mic transforemer question..

I have and it's a nice imporvement. Same overall tone but better.
I used the Lundahl transfo and the humbucking wiring proposed by royer.

A really, really nice mic now.

JP

"Steve Ryan" <sryan@xxxxxxxxxxxxxxx> a écrit dans le message de
news:dhhe7503166@xxxxxxxxxxxxxxxxxx
> I've read a few of Scott' references regarding a sowter transformer that
> will improve an RCA 74b mic. I'm hoping to reduce noise a bit and get a
> wider response. I like the overall tone of the original mic's and wouldn't
> want to mess much with the midrange tone.
> Has anybody done this mod?
> From sowter's website I see two possible options.
> The 9760 (1:10 ratio) and the 8074 (1:40 ratio). The 9760 is for ribbon
> impedance's of 1-3 ohms. The 8074 is for ribbon's under 1 ohm.
>
> Is the 8074 the right one?
> Will these fit into the case on the RCAjr's?
> Any other advice?
>
> Thanks
> Steve
>


.