Live mixers for digital sound



.... no -- wait...yeah, well

This is neither an endorsement of the specific product, nor
a cheer for the techniques employed, but a simple recounting
of the experience.

I've just finished a run of "Joseph and The Amazing
Technicolor Dreamcoat". Southern California outdoor venue.
Including dress rehearsal, played to about 15,000 people.
10-players in the orchestra.

I elected to use the Behringer DDX3216 just to see how it
would hold up in the heat (126 degrees on stage) and
humidity we've been experiencing. I also used four ADA8000
as preamps for four PZMs across the stage, four A-T wireless
with Countryman B3s, and orchestra (three DIs and 13 mics.)

Rather than go into detail about complete setup (foldbacks
for stage, conductor monitor, etc.) I'll just say that the
setup was pretty routine, and quite similar to any other
setup I've used for this type of show.

I did, however, also use the Crest XR-20, both as a
potential backup, and to drive the house system. The latter
role was employed only as a consequence of the DDX not
having the routing capabilities I need for this venue. The
DDX has only a "stereo" master, and the busses are not
assignable to either left or right as a submix. In this
case, there was not a way to control the orchestra/stage mix
balance as individual submixes to the mono house feed. I
just sent the stage mix to right master, the orchestra to
left master, out to two Crest inputs, assign to mono, Voila!

Everything sat outside (under EZ-Ups) for a week. Nearly got
rained on, lots of dust, and abundant sun.

Final analysis: all worked flawlessly. No glitches, no
software hiccups. Only trouble through the whole thing was a
drop of sweat taking out a B3 right after "Potiphar". No
problem, changed element at intermission, on with the show.

There you go. Another trial of a digital mixer in a live
sound situation. Seemed to come through pretty well. Of
course, when I turn it on again, some of the smoke may come
out. I don't know how much smoke is required for these
things to operate correctly, but I'd sure hate to lose any.


TM
.



Relevant Pages

  • Re: Linked tasks - LOST LEVELS!!!
    ... During the setup ... potential links can be annotated in the Notes field ... dynamic master is created. ... the master that contains user's subprojects and replace with the new ...
    (microsoft.public.project)
  • Re: Valerian Vinyl
    ... setup is obvious, I did not think ít up. ... The Paul Whiteman Orchestra was the very ... Early classical setups work especially well in studio recording. ... Surely you realise that Ted Heath was long before my time? ...
    (uk.rec.audio)
  • Re: ASUS P5W DH Deluxe problem
    ... I cannot do anything because I cannot access the Setup BIOS. ... It's freezing to detect the 4th Master and that's it, ... fields with the stringextracted from the drives. ...
    (alt.comp.periphs.mainboard.asus)
  • Re: New DVD Burner
    ... little bit more information about your setup and how your computer is set ... The device must be set to Master if it is the only device on the ... Cable Select which automatically selects the settings for you. ... > your DVD burner has to be a master. ...
    (microsoft.public.windowsxp.hardware)
  • Re: testing mirrored drives on windows 2003
    ... >I created a mirror with two ide drives (on one cable - setup one drive as ... > master and another as slave by jumpers) on windows 2003. ... > disconnected the master and setup the slave drive to master and tried the ...
    (microsoft.public.windows.server.general)