Re: Windows Vista and DMX-512 interfaces + software
- From: "David McCall" <mccallmail@xxxxxxxxxxx>
- Date: Fri, 09 May 2008 20:46:00 GMT
"Jim Murray" <not.interested@xxxxxxxxxxxxx> wrote in message
news:mr0Vj.808$DZ6.543@xxxxxxxxxxxxxxxxxxxxxxxxxxxx
Tomi Holger Engdahl wrote:Good point.
I have eariler used DMXcontrol software ( http://www.dmxcontrol.de/)
and kristofnys parallel port to DMX-512 adapter (
http://www.epanorama.net/dmx512pp/index.html ) running on Windows 98 and
Windows 2000 PCs.
this has worked as expected.
Now when the old PC running that Windows 2000 has been replaced with a
new PC that runs Windows Vista and does not have a parallel port, the
question is what is the best software and hardware
combination to get it to control DMX-512 equipment. Prefereably
free/cheap designs.
You will truly struggle to find ANY DMS software/dongle with Vista
support. Vista's driver model is totally different to 2k and XP, requiring
almost a total rewrite of some drivers to get them to work reliably with
Vista.
It is questionable that he would have Vista drivers for the interface.
I just briefly tried the software and it looked like that part would work.
Add to that the general instability of Vista in use and it is notI wonder how easy it is to get XP drivers
something I would want to be using in any kind of critical application at
all.
Load a copy of XP onto the machine and pop out to the local PC shop where
you should be able to pick up a parallel port card for not much money.
They are easy to install (shouldn't take more than 10-15 minutes) and you
should then be able to use your existing hardware/software on the new
machine.
Jim.
for a new machine that was designed with Vista.
It would be about as much fun as building a computer from scratch.
I use to build all of my own computers and upgrade them as time went by.
After building a couple dozen computer I found it to be a real pain in the
ass.
Now I pretty much buy stock machines with a recover disk that will
return the machine to "like new". It works for me
because I don't really want to be a computer expert.
There are still a few XP machines out there
Microcenter has been advertizing son refurbished machine
as have Geeks.
Here are a couple examples.
http://www.geeks.com/details.asp?invtid=VM460-UD4500P-DT&cat=SYS
http://www.microcenter.com/single_product_results.phtml?product_id=0283769&BrCs=498&BrCg=16181433&BrRc=1468429604
David
.
- Follow-Ups:
- Re: Windows Vista and DMX-512 interfaces + software
- From: Jim Murray
- Re: Windows Vista and DMX-512 interfaces + software
- References:
- Windows Vista and DMX-512 interfaces + software
- From: Tomi Holger Engdahl
- Re: Windows Vista and DMX-512 interfaces + software
- From: Jim Murray
- Windows Vista and DMX-512 interfaces + software
- Prev by Date: Re: Windows Vista and DMX-512 interfaces + software
- Next by Date: Protect yourself against Operation Sudden Fall
- Previous by thread: Re: Windows Vista and DMX-512 interfaces + software
- Next by thread: Re: Windows Vista and DMX-512 interfaces + software
- Index(es):
Relevant Pages
|