Re: Zaxcom wireless too noisy
- From: Michael Clark <audiofilesound@xxxxxxx>
- Date: Thu, 30 Aug 2007 17:37:01 -0700
On Aug 30, 8:06 pm, g...@xxxxxxxxxx wrote:
The bias voltage on all Zaxcom wireless is 3.3V so I do not suspect
the bias voltage to be the problem.
Our dealer supplied the B6 so I do not know if is the red version
(High SPL). If so, this would account for the higher noise floor.
The B6 has worked well in the past so it should not be a problem now.
Matt please email me your phone number and I will call you tomorrow.
The dynamic range of the system is about 105dBu so the only noise
should be the self noise of the microphone.
Glenn
Yep, mines a Red Band B6.
.
- Follow-Ups:
- Re: Zaxcom wireless too noisy
- From: Gtrew
- Re: Zaxcom wireless too noisy
- References:
- Zaxcom wireless too noisy
- From: Matt
- Re: Zaxcom wireless too noisy
- From: Larry Fisher
- Re: Zaxcom wireless too noisy
- From: gs
- Zaxcom wireless too noisy
- Prev by Date: Re: Zaxcom wireless too noisy
- Next by Date: Re: urgent: need FCP procedure to read&sync LTC on audio channel
- Previous by thread: Re: Zaxcom wireless too noisy
- Next by thread: Re: Zaxcom wireless too noisy
- Index(es):
Relevant Pages
|