Re: Tascam HD-P2 Software update
- From: Philip Perkins <spamiser@xxxxxxxxx>
- Date: Thu, 23 Aug 2007 10:08:05 -0700
On Aug 23, 9:21 am, Blas <blasaudiop...@xxxxxxxxx> wrote:
On Aug 22, 11:37 am, "Courtney Goodin" <cmgoo...@xxxxxxxxxxx> wrote:
<AdmNaism...@xxxxxxxxxxxx> wrote in message
news:1187761449.023658.81030@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
There is a firmware update (v 1.05) available for the HD-P2 at the
Tascam website. I guess it's been available for two weeks, now.
Load the update on your CF card, put it in the machine, and power up.
The rest is automatic.
Did anyone else know this thing runs on the Win CE operating system?
I didn't know the HD-P2 ran on Windows CE, but I wouldn't be surprised.
Most hand-held or car mounted GPS units and many smart phones operate on
CE behind the scenes. And the new Tascam X48 runs on embedded Windows XP.
It is an easy (and mature) platform to develop for since there are years of
third party development tools available.
---Courtney
What does this update do? I would be great if it "menued" the
selection of power source. Currently, it decides which to draw from
by virtue of which is higher supply source. Sooooooooo, if you have
fresh batteries in, they will be used over the wallwart source!!!!
Crazy isn't it.
Blas
This has never been a problem for me--my P2 always takes the external
power source even down in to very low vottages (like
below what you'd want to take an NP1 type battery to. I left one on
the machine all day once by mistake, it ran the NP1 down to below 10
vdc and never looked at the internal batteries. I see this as good in
some ways and bad in others......
Philip Perkins
.
- Follow-Ups:
- Re: Tascam HD-P2 Software update
- From: Philip Perkins
- Re: Tascam HD-P2 Software update
- References:
- Tascam HD-P2 Software update
- From: AdmNaismith
- Re: Tascam HD-P2 Software update
- From: Courtney Goodin
- Re: Tascam HD-P2 Software update
- From: Blas
- Tascam HD-P2 Software update
- Prev by Date: Re: More ?'s about breakaway
- Next by Date: kit rental / technical support in salem and greensboro nc?
- Previous by thread: Re: Tascam HD-P2 Software update
- Next by thread: Re: Tascam HD-P2 Software update
- Index(es):
Relevant Pages
|