Re: 442 TA3F output question... can't get optimum gain levels into Lectro transmitters.

Replying to myself,

I know I could just get some TA3F to TA5F cables with attenuation
built in, but that doesn't solve the problem of having too little Mic
level input available to the transmitters. It only works as a fix if I
select LIne level as the TA3F output level. I consulted with the
maker of my cables, a major pro location sound reseller and
manufacturer, and they indicated that my cables are built exactly as
all of the other cables, per Sound Devices' specs, that they sell for
this application. They were puzzled as well.

BL

.

Relevant Pages

  • Re: JINETD and Other NICs
    ... I have reason to believe that it is because some folks home made their ... Our cable is factory built. ... We always recommended against cross over cables. ... To join/leave the list, search archives, change list settings, * ...
    (comp.sys.hp.mpe)
  • Re: 442 TA3F output question... cant get optimum gain levels into Lectro transmitters.
    ... I know I could just get some TA3F to TA5F cables with attenuation ... built in, but that doesn't solve the problem of having too little Mic ... feed my Lectrosonics transmitters and my gain with 0DB tone at about 9AM on the pot when the -20 light just barely glows. ...
    (rec.arts.movies.production.sound)
  • Dead Hard Drive
    ... Recently I built a new PC. ... all the settings in the BIOS and made sure cables were all securely ... disconnected the hard drive from my old computer to reconnecting it to ... my new computer (a matter of minutes)? ...
    (alt.comp.hardware.pc-homebuilt)
  • Re: Forth Bridge painting programme
    ... The cables concerned are the main cables, ... Claims that the existing bridge is falling down were used to lobby ... That is why the "Forth Replacement Crossing Study" makes no ... bridge is built, but rather devotes its attention to using the ...
    (uk.railway)