Re: Radio Mic Antenna combiner

You WILL need a ground plane for those little antennas, and decent 50ohm
cable. Maybe some "bat-wing" or "shark-fin" antennas would work a bitt
better. Oh, and you'll still need the good cable for them as well. Try and
keep your runs under 50 feet or the cable loss will negate your stronger
antennae.

D.

"Nick" <kd5ftn@xxxxxxxxx> wrote in message
news:1152112607.169585.154040@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Being Diversity recievers, I would mount one antenna (Even just the
little rubber-ducky omnis) on each side of the proscenium. They should
be close enough, and the distance between them will account for RF
dropout.

Yagi's are a little overboard for a stage setting and may perform worse
due to how directional they are.



.

Relevant Pages

  • Re: About - Citizens Band (CB) Radio
    ... Get a decent converation going, and you'll be surprised at how many ... Peter, in your opinion, what would constitute a decent rig? ... Mobile antennas were either 1/4-wave ... whips or HyGain "rabbit ears" on the gutters - also great antennas. ...
    (rec.radio.shortwave)
  • Re: About - Citizens Band (CB) Radio
    ... Get a decent converation going, and you'll be surprised at how many ... Peter, in your opinion, what would constitute a decent rig? ... Mobile antennas were either 1/4-wave ... whips or HyGain "rabbit ears" on the gutters - also great antennas. ...
    (rec.radio.shortwave)
  • Re: About - Citizens Band (CB) Radio
    ... Get a decent converation going, and you'll be surprised at how many ... Peter, in your opinion, what would constitute a decent rig? ... a HyGain Penetrator and a Wilson 6- ... Mobile antennas were either 1/4-wave ...
    (rec.radio.shortwave)
  • Re: Infrared reciver
    ... Having never used one in this way, Does the packaging ... >>> fiber modules and see if the respond to this range also. ... WAPs and the tin can antennas that can be found on the 'net. ... pair of decent antennas from them. ...
    (sci.electronics.components)
  • Re: balun
    ... > The ground plane kits I have seen do not impress me. ... > antennas, mounted at the base of the antenna, and flat and level. ... > need to compare the field strength with the before and after ground plane ... > This is all good stuff here Chad! ...
    (rec.radio.cb)