Re: Help scratch aquarium glass! Advice needed!!!!
so it is ok to fill it up all the way etc? it is quite a deep scratch.
Does it mean the glass is weak now or is it about the same? I don't
even know if it should be called a scratch or a chip it is like a line
but there is definely glass missing since it is all white and there is
a dent...kinda like if you tried to saw it?
.
Relevant Pages
- Re: Sudden windshield crack.
... This particular chip was the next thing to invisible, ... those stresses are given a focus to relieve themselves - that chip - ... Windshields are complex, starting with flat float glass. ...
(alt.autos.toyota) - Re: how to fix a small chip in a glass blender?
... but it leaks a little and I'm worried about the chip getting worse. ... While in this case he probably should replace it, since it leaks, chipped areas can often be smoothed out so they don't present a hazard. ... I've done it quite a few times on glass items that have chips. ... A chipped area or sharp edge can be heated over the flame of a gas stove or propane torch. ...
(rec.food.cooking) - Re: Glass Chip: Do we have an authority on glass?
... cracks. ... It is simply a tiny chip. ... I'm not a glass expert but I did deal effectively with a chip in my ... Nissan Pathfinder's windshield - lasted 3 years and then I sold the ...
(rec.outdoors.rv-travel) - Re: Bad player 3 display on system 11b, need help!
... problems that this can be and they are both on the display board ... The most likely is the display glass is broken/outgassed. ... The other thing it could be is the chip at U6 is bad UDN6118. ... experience soldering, a step above soldering coils and diodes under ...
(rec.games.pinball) - Re: Bad player 3 display on system 11b, need help!
... Every power supply problem would affect all 4 displays ... The most likely is the display glass is broken/outgassed. ... The other thing it could be is the chip at U6 is bad UDN6118. ... experience soldering, a step above soldering coils and diodes under ...
(rec.games.pinball) |
|
