Re: "Can't create new socket" [xnews]

Holly said:

"Mike Easter" <MikeE@xxxxxxxxxxxx> wrote in news:13tja6sbonmu3e0
@corp.supernews.com:

Holly wrote:
"Mike Easter

I would rebuild my network with both the main box & the wireless one
to the router. Shutdown/powerdown the connectivity modem (cable or
whatever), the router, and the boxes - then power them back up in the
order: modem to the greenlights, then router observing its diagnostic
lights, then mainbox, then LTbox.

i guess I should have added that i have already tried multiple power
cycles, no joy

What I described wasn't a 'power cycle' in the sense of (simply)
powercycling the mainbox. It was a powering down of everything followed
by a sequence of powering up the modem so that it could get an IP
address, followed by powering up the router so that it could get the IP
address from the modem in anticipation of translating that IP to
distribute to the LAN, followed by powering up the mainbox so that it
could get a translated IP address from the router, followed by powering
up the LT so that it could get another different IP address from the
router.

If you can't get a NATed IP from the router after the above sequential
process, then I would think that either you have a hardware problem such
as the NIC in the mainbox or a (corrupt) winsocket problem.

http://support.microsoft.com/?kbid=811259 How to determine and to
recover from Winsock2 corruption in Windows Server 2003, in Windows XP,
and in Windows Vista

http://support.microsoft.com/?kbid=299357 How to reset Internet
Protocol (TCP/IP) in Windows XP

http://windowsxp.mvps.org/winsock.htm WinSock XP Fix - Tool which fixes
XP internet connectivity --
http://www.snapfiles.com/get/winsockxpfix.html WinSock XP Fix offers a
last resort if your Internet connectivity has been corrupted due to
invalid or removed registry entries. It can often cure the problem of
lost connections after the removal of Adware components or improper
uninstall of firewall applications or other tools that modify the XP
network and Winsock settings. I


Mike I luv You ! the netsh winsock reset thing did it, you are a genius !
Thanx again, I dedicate the rest of my day to you !

Wow. Correct me if I'm wrong, but I think Mike just cyberscored. =)

^5
--

Eggs

A piece of motorway and piece of dual carriage way are enjoying a drink in
the pub. In walks a piece of red tarmac. The motorway whispers to the
carrageway "Come on lets drink up and go before the trouble starts; He's a
cyclepath!"
.

Relevant Pages

  • Changing from peer-to-peer to server based environment
    ... He originally had his Verizon DSL with a Westell 6100 modem connected ... to the uplink port on a Linksys WRT54GS wireless router. ... The router acted as the DHCP server. ... port, I had connectivity. ...
    (alt.internet.wireless)
  • Re: broadband newbie queries
    ... >>configuration as well as that accursed broadjump spyware. ... that's totally uneccessary to broadband connectivity and has been known ... consisted of manually setting the wan ethernet port of the router PC to ... with the replacement standalone Ambit cable modem and ...
    (uk.comp.homebuilt)
  • Re: Router Question
    ... If I have a cable modem, and router for that location, is it ... > I notice in my router set-up that I can clone the MAC address to match the ... connectivity to comcast... ...
    (alt.computer.security)
  • Re: modem dialin aux port problems 2801
    ... When I try to dial from router nothing happens. ... Connect the modem to the AUX port using a rolled ... This means you do not have physical connectivity to the modem. ...
    (comp.dcom.sys.cisco)
  • Modem problem?
    ... I have a Linksys BEFSR41 router running with an RCA cable modem. ... well for many months and all of a sudden there was no connectivity. ... Does anyone know what I might try to get the router working again? ...
    (comp.dcom.modems.cable)