Re: Re. Need news-server to test XPAT.

"James E. Morrow" <jamesemorrow@xxxxxxxxx> wrote in
<news:44fb95ff@xxxxxxxxxxxxxxxxxxxxx>:

When I reset my normal NewServer to: NNTP =
"secnews.netscape.com" I get "411 No such group" even for
common groups.

Common groups where? It only carries moz/ns groups. Telnet in
on port 119 and do a

list

command to see the groups it carries.

Maybe I missed something here. But the old secnews server should
answer only on port 563. It carries only the old Netscape private
groups, not to be confused with the news.mozilla.org server. The
moz server carries the current Moz groups.

secnews.netscape.com and oldnews.mozilla.org are both aliases of
ripley.aoltw.net (204.29.187.156). Connecting on port 563 gets you
the Netscape groups and connecting on 119 gets you the old Mozilla
groups.

--
»Q«
links to Xnews resources:
<http://xnews.remarqs.net>
.

Relevant Pages

  • [Full-disclosure] Major ISPs arbitrarily blocking IRC and hijacking DNS entries
    ... My name is Anthony Sanchez and I have run a small irc network, ... connecting users to ".remove" in the event that the connection was a bot. ... apparently using some form of port restriction as ... Server: ns1.dc.cox.net ...
    (Full-Disclosure)
  • Re: Rmote Access problem
    ... port to your SBS Server. ... When I open the router to forward to the server what name do I give the ... Access is remote remote Web Workplace, ... Connecting from a separate location through the internet. ...
    (microsoft.public.windows.server.sbs)
  • Re: FTP and router issue
    ... The error is due to ftp passive port issue. ... > i have forced ftp passive mode to data transfer over port 8001. ... > suppose my internal IP for the server is i.i.i.i and the external IP is ... > connecting to i.i.i.i:8001 ...
    (microsoft.public.inetserver.iis.ftp)
  • Re: Remote Administration
    ... I am connecting to the server through the router using the static IP of the ... but how do I check that port 3389 is open and forwarded ... Remote connections ...
    (microsoft.public.windows.server.sbs)
  • Re: Cannot Connect to RWW externally.
    ... Under nat options there are two options - full feature and SUA only, changing it from SUA to full feature hides the port redirection options as full feature in their speak is one to one nat mapping for multiple wan addresses to multiple lan addresses, SUA is the one to choose for standard single wan address into multiple lan addresses based on the ports. ... But I was connecting to a RWW at our main office and then from the RWW client connecting back in. ... Yes the router does not perform any loop backs, so that's why I did the RWW connection. ... I have currently forwards Ports 443 and 4125 to the LAN IP of the server ...
    (microsoft.public.windows.server.sbs)