Re: Mulitlevel Waste Disposal (Repost)
On Thu, 20 Apr 2006 11:46:46 -0500, "Amused"
<Amused@xxxxxxxxxxxxxxxxxx> wrote:
Gather up all the high level nuclear waste. Drill a large (ish) hole into
base granite. Oh, about 10,000 feet down. (Might have to drill a couple
of holes.) Have a big public debate on how deep to drill the holes.
A thought: What would be the ramifications of placing radioactive
waste into a number of couple-thousand feet deep "wells" on the
subducting side of a plate boundary?
--
Mr.E
.
Relevant Pages
- Re: Huge oil field found in Gulf of Mexico
... I had no idea that they had to drill down that deep. ... SAN RAMON, CA, United States -- Chevron Corp. and two partners have recorded a stunning 6,000-plus barrel per day crude oil production rate from a single deep-water Gulf of Mexico well. ... Known as the Jack 2 well, it sits in 7,000 feet of water and was drilled to more than 28,000 feet, Chevron said Tuesday. ... Chevron and its partners, Devon Energy Corp. of Oklahoma City and Norway`s Statoil ASA, will drill another appraisal well next year and plan to begin commercial production in 2008. ...
(sci.geo.geology) - Re: Flat bottomed drilled holes
... holes in some rather extreme conditions. ... largest is .1875 1.0 deep, a mere 5 diameters. ... them follow up with a cobalt drill ground to 180 ...
(alt.machines.cnc) - Re: Flat bottomed drilled holes
... holes in some rather extreme conditions. ... 1.0 deep, a mere 5 diameters. ... follow up with a cobalt drill ground to 180 degree tip in order to ...
(alt.machines.cnc) - Re: Flat bottomed drilled holes
... holes in some rather extreme conditions. ... 1.0 deep, a mere 5 diameters. ... follow up with a cobalt drill ground to 180 degree tip in order to ...
(alt.machines.cnc) - Re: Sharpie Spotting
... would drill .010 deep at 500 RPM. ... When I ran the program the Sharpie spotted where the 4-40 holes would be put. ...
(alt.machines.cnc) |
|
