I live off city mains water with a pH of around 6.7 and very low
alkalinity (46ppm). The hardness is between 20-30 mg/L, and no
iron/manganese problems. The thing is that my skin just can't take this
type of water, and I presume the pH can go lower than 6.7 due to the
low alkalinity present. I had a neutralizer installed and fitted, but
the pH seems to be all over the place
How much hardness should be added to just neutralize and not go higher,
or should I even have bothered with this pH unit at all in the first
place. The water is terrible now, slimy even.
Re: San Diego water ... >alkalinity and hardness....>tap water will end up around 5.5, ... >that up I'd have to add alkalinity in order to balance the ...Andrew, what numbers are you working with for calcium, magnesium, ... (rec.crafts.brewing)
Re: calcuim bentonite ... >>use full amount of dish washer soap or washing machine soap for fear of ... > Well it depends on if we're talking General Hardness or Alkalinity....water to neurtralize acid, is also known as buffering capacity. ... (rec.ponds)
pH Neutralizer ... I live off city mains water with a pH of around 6.7 and very low ...iron/manganese problems....low alkalinity present. ... How much hardness should be added to just neutralize and not go higher, ... (alt.home.repair)
Re: pH Neutralizer ... I live off city mains water with a pH of around 6.7 and very low ... The hardness is between 20-30 mg/L,...low alkalinity present. ... How much hardness should be added to just neutralize and not go higher, ... (alt.home.repair)
Acid Neutralizer System ... I live off city mains water with a pH of around 6.7 and very low ...iron/manganese problems....low alkalinity present. ... How much hardness should be added to just neutralize and not go higher, ... (misc.consumers.house)
