Problems with Plaster, Lathing, Bathroom Cabinet

Trying to install a medium-heavy bathroom cabinet in an old house.

Walls are old plaster and lathing.

In the inside of the cabinet there is a board about 1/2 inch thick at the
top. I have to get through that
then the plaster and lathing. Trouble is I screwed up and have a 5/16 inch
hole through the little board
in the cabinet and same in the wall and lathing trying to install those dry
wall anchor which did not seem to work.

Now how do I get the thing secured to the wall?

Thanks.


.

Relevant Pages

  • Re: OT: wall weirdness
    ... Mark out round the edges of the new cabinet, ... Now, with a panel saw, do a shallow cut ACROSS the wall, you will find ... Dont bother sanding, unless you ... want the house full of plaster dust. ...
    (rec.crafts.metalworking)
  • Re: OT: wall weirdness
    ... Bill Schwab wrote: ... This is an easy one- assuming you have a back on the cabinet you want ... Now, with a panel saw, do a shallow cut ACROSS the wall, you will find ... want the house full of plaster dust. ...
    (rec.crafts.metalworking)
  • Re: Problems with Plaster, Lathing, Bathroom Cabinet
    ... Walls are old plaster and lathing. ... In the inside of the cabinet there is a board about 1/2 inch thick at the top. ... in the cabinet and same in the wall and lathing trying to install those dry wall anchor which did not seem to work. ...
    (misc.consumers.house)
  • Re: Davids Kitchen Update 7, installation (w/pics)
    ... Did you brad nail the cat to the window frame? ... Mike Brown ... water leaked into the cabinet below, ... It was screwed to the wall, but the wires were not connected. ...
    (rec.woodworking)
  • Re: Cabinet terminology
    ... I've seen them in base and wall cabinet vesions and you can find same at ... Stacking to 42" wall versions or a base unit and a 42" wall unit might fill ... ACCURIDE 1234 Flipper Door Slides ... Choose the appropriate slide length and add the hinge ...
    (rec.woodworking)