Re: Was drueckt IDE Performance?

Lars Uhlmann wrote:
>
> Welche Ausgabe liefert denn 'hdparm -vI <device>'?

/dev/hda:
multcount = 16 (on)
IO_support = 1 (32-bit)
unmaskirq = 1 (on)
using_dma = 1 (on)
keepsettings = 0 (off)
readonly = 0 (off)
readahead = 4000 (on)
geometry = 19457/255/63, sectors = 160041885696, start = 0

ATA device, with non-removable media
Model Number: SAMSUNG SP1604N
Serial Number: S013J10WA04386
Firmware Revision: TM100-23
Standards:
Supported: 7 6 5 4
Likely used: 7
Configuration:
Logical max current
cylinders 16383 65535
heads 16 1
sectors/track 63 63
--
CHS current addressable sectors: 4128705
LBA user addressable sectors: 268435455
LBA48 user addressable sectors: 312581808
device size with M = 1024*1024: 152627 MBytes
device size with M = 1000*1000: 160041 MBytes (160 GB)
Capabilities:
LBA, IORDY(can be disabled)
Queue depth: 1
Standby timer values: spec'd by Standard, no device specific
minimum
R/W multiple sector transfer: Max = 16 Current = 16
Recommended acoustic management value: 254, current value: 128
DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 udma5 *udma6
Cycle time: min=120ns recommended=120ns
PIO: pio0 pio1 pio2 pio3 pio4
Cycle time: no flow control=240ns IORDY flow control=120ns
Commands/features:
Enabled Supported:
* READ BUFFER cmd
* WRITE BUFFER cmd
* Host Protected Area feature set
* Look-ahead
* Write cache
* Power Management feature set
Security Mode feature set
* SMART feature set
* FLUSH CACHE EXT command
* Mandatory FLUSH CACHE command
* Device Configuration Overlay feature set
* 48-bit Address feature set
* Automatic Acoustic Management feature set
SET MAX security extension
* DOWNLOAD MICROCODE cmd
* SMART self-test
* SMART error logging
Security:
Master password revision code = 65534
supported
not enabled
not locked
not frozen
not expired: security count
supported: enhanced erase
96min for SECURITY ERASE UNIT. 96min for ENHANCED SECURITY ERASE
UNIT.
HW reset results:
CBLID- above Vih
Device num = 0 determined by the jumper
Checksum: correct


.

Relevant Pages

  • Re: "Time and Billing" database question -- access
    ... > Oh the power of one little word! ... > other options where I could set the security. ... Reset your menubar. ... Prev by Date: ...
    (microsoft.public.access.gettingstarted)
  • Re: NTFS Rights Error
    ... You need to reset the permissions on the drive ... Right click on the drive and click security. ... Prev by Date: ...
    (microsoft.public.windowsxp.general)
  • Re: FOR A SKILLED IT EXPERT - WIN2K SERVER - DOMAIN CONTROLLER
    ... So then the policy is disallowing all login by all users at all machines? ... boots up on cached profile only) The interactive logon problem has applied ... manual security reset. ... If you had not tried the reset we could have pulled you out of this, ...
    (microsoft.public.win2000.security)
  • Re: FOR A SKILLED IT EXPERT - WIN2K SERVER - DOMAIN CONTROLLER
    ... Windows Server 2003 one can, but not from a safe mode boot). ... boots up on cached profile only) The interactive logon problem has applied ... manual security reset. ... If you had not tried the reset we could have pulled you out of this, ...
    (microsoft.public.win2000.security)
  • Re: FOR A SKILLED IT EXPERT - WIN2K SERVER - DOMAIN CONTROLLER
    ... (last message denied access to the server from the workstation - the WKSTN ... manual security reset. ... Yes - we have a very recent back up of the system state, but how do we logon ... If you had not tried the reset we could have pulled you out of this, ...
    (microsoft.public.win2000.security)