Client-PC zusammenbasteln



Mahlzeit!

Ich arbeite hauptsächlich per remote-X an meinem Server. Bisher tut
dafür ein alter AMD/K6-2 mit einer Matrox G400 und einer
netzbootfähigen Grafikkarte ganz gut. Das System hat noch eine kleine
IDE-Platte drin, auf der ein Windows 98 (falls ich das mal brauche)
lebt und wohin ich ab und an mal ein Backup schiebe. Normalerweise
schläft die Platte aber, da der Rechner komplett übers Netz bootet.
Dann sind da noch ein CD-ROM und ein CD-Brenner drin (beides SCSI)
sowie ein Scanner über SCSI angeschlossen.

Das System ist nicht unbedingt wirklich leise, läuft wegen einiger
Probleme mit Kernel 2.6 (hakeliger Mauszeiger, doppelte
Tastenanschläge etc.) noch unter 2.4 (weswegen cdparanoia aus Etch
nicht mehr mit mir spielen will) und da ich aktuell aus Bastelgründen
meinen Laptop als X-Terminal nutze, keimt in mir der Wunsch, diesen
Rechner in Rente zu schicken und mal durch was Zeitgemäßes zu
ersetzen.

Aber was?

Anforderung wäre:
- Netzwerkboot
- opt. Laufwerk zum CD-Rippen
- kleine Festplatte, um ggf. mal ein Windows zu booten
- Soundausgabe (44.1kHz 16bit stereo reichen; meine
Yamaha-Synthesizerkarte nutze ich sowieso nicht und ISA bekommt man
heutzutage sowieso nirgendwo eingebaut)
- Grafikkarte, Tastatur- und Mausanschluss (ich habe sogar einen
USB-Adapter, um meine gute 1391403 weiterzubetreiben)

Da ich den Brenner und Scanner nur gaaaanz selten benutze, würde ich
die auch am alten PC lassen und den bei Gelegenheit dann mal getrennt
hochfahren.

Ich hab ja schon mal in Richtung Mac mini geguckt, aber das Ding
scheint mir
a) zu leistungsfähig (aktuell reichen hier z.B. 256MB RAM locker)
b) zu teuer
c) unfähig für Win98
d) unfähig für SCSI zu sein (aber s.o.: Scanner muss nicht unbedingt)
e) all of the above!
zu sein.

Gibt's da kleinere Alternativen? Irgendwas schnuckeliges, meinetwegen
auch ohne Lüfter und andere bewegliche Teile, wenn es bezahlbar ist?
Hauptanwendung auf der Kiste ist der X-Server plus nasd für Sound.

Gruß,
Christian
--
.....Christian.Garbs.....................................http://www.cgarbs.de
Murphy's Laws of Combat:
10. If you can't remember, the claymore is pointed at you.
.



Relevant Pages

  • Re: Vanishing SCSI board
    ... scsi controller card and scanner were present and working in 98. ... Recently I upgraded the software to Windows ... > sure there was no addressing conflict associated with the SCSI board. ...
    (microsoft.public.windowsxp.general)
  • Re: Windows STI interface RawReadData, etc
    ... a single instance of Windows can only capture from ... The limitation is an Windows system ... if one scanner is a USB scaner and has the ... you can tell windows to ignore the SCSI ...
    (comp.periphs.scanners)
  • Re: Connecting HP Scanjet IIP (2P) 25-pin SCSI To Modern PC?
    ... SCSI only. ... Scanner runs only in async mode. ... fits a 25-pin parallel port connector, which I thought might be a pass- ... does run under Windows XP. ...
    (comp.periphs.scanners)
  • Re: Recommended USENET newsgroup access
    ... windows you could crash and still be able to re-boot to DOS and fix it. ... I was using my Visioneer 4400 USB scanner to scan parts for my ... The trick was to lay a white cotton tee shirt ... I have several early HP SCSI scanners, ...
    (sci.electronics.repair)
  • Re: Web Application Testers.
    ... > automatically alerts you to the latest security vulnerabilities please see: ... Platforms: ... A Windows/MS-DOS CGI scanner which scans for 65 remote ... Windows 2000 and Windows NT ...
    (Vuln-Dev)