Re: USB neu starten



noch am wenigsten schmerzvoll sein. Du könntest aber auch einfach mal die letzten
paar Zeilen der Ausgabe von "dmesg" nach dem erfolglosen Einstecken posten.


Hier die "letzten" paar Zeilen nach dmesg.
Für mich allerdings ein Böhmisches Dorf.
Das seltsame daran ist Drucker,externe Festlatte und Scanner hängen gemeinsam an einer Steckdosenleiste. Während Festplatte und Drucker ohne probleme funktionieren bleibt der Scanner tot.

Achim




usbcore: registered new driver usbfs
usbcore: registered new driver hub
USB Universal Host Controller Interface driver v2.2
ohci_hcd: 2004 Nov 08 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ACPI: PCI Interrupt Link [LUBA] enabled at IRQ 7
PCI: setting IRQ 7 as level-triggered
ACPI: PCI interrupt 0000:00:02.0[A] -> GSI 7 (level, low) -> IRQ 7
ohci_hcd 0000:00:02.0: nVidia Corporation nForce2 USB Controller
PCI: Setting latency timer of device 0000:00:02.0 to 64
ohci_hcd 0000:00:02.0: irq 7, pci mem 0xe0002000
ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 3 ports detected
ACPI: PCI Interrupt Link [LUBB] enabled at IRQ 5
PCI: setting IRQ 5 as level-triggered
ACPI: PCI interrupt 0000:00:02.1[B] -> GSI 5 (level, low) -> IRQ 5
ohci_hcd 0000:00:02.1: nVidia Corporation nForce2 USB Controller (#2)
PCI: Setting latency timer of device 0000:00:02.1 to 64
ohci_hcd 0000:00:02.1: irq 5, pci mem 0xe0003000
ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 12
PCI: setting IRQ 12 as level-triggered
ACPI: PCI interrupt 0000:00:02.2[C] -> GSI 12 (level, low) -> IRQ 12
ehci_hcd 0000:00:02.2: nVidia Corporation nForce2 USB Controller
PCI: Setting latency timer of device 0000:00:02.2 to 64
ehci_hcd 0000:00:02.2: irq 12, pci mem 0xe0004000
ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 3
PCI: cache line size of 64 is not supported by device 0000:00:02.2
ehci_hcd 0000:00:02.2: park 0
ehci_hcd 0000:00:02.2: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 6 ports detected
Serial: 8250/16550 driver $Revision: 1.90 $ 14 ports, IRQ sharing disabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
ts: Compaq touchscreen protocol output
i2c_adapter i2c-0: nForce2 SMBus adapter at 0x5000
i2c_adapter i2c-1: nForce2 SMBus adapter at 0x5100
Linux agpgart interface v0.100 (c) Dave Jones
agpgart: Detected NVIDIA nForce2 chipset
agpgart: Maximum main memory to use for agp memory: 439M
agpgart: AGP aperture is 64M @ 0xd8000000
usb 3-2: new high speed USB device using ehci_hcd and address 2
ohci_hcd 0000:00:02.1: wakeup
forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.31.
ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ACPI: PCI interrupt 0000:00:04.0[A] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:04.0 to 64
ohci_hcd 0000:00:02.0: wakeup
usb 2-1: new low speed USB device using ohci_hcd and address 2
eth0: forcedeth.c: subsystem: 01297:0531 bound to 0000:00:04.0
Linux video capture interface: v1.00
usb 2-2: new full speed USB device using ohci_hcd and address 3
bttv: driver version 0.9.15 loaded
bttv: using 8 buffers with 2080k (520 pages) each for capture
bttv: Bt8xx card found (0).
ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 5
usbcore: registered new driver hiddev
ACPI: PCI interrupt 0000:01:04.0[A] -> GSI 5 (level, low) -> IRQ 5
bttv0: Bt878 (rev 17) at 0000:01:04.0, irq: 5, latency: 32, mmio: 0xdc000000
bttv0: detected: Pinnacle PCTV Sat [card=94], PCI subsystem ID is 11bd:001c
bttv0: using: Pinnacle PCTV Sat [card=94,autodetected]
bttv0: gpio: en=00000000, out=00000000 in=001f00fc [init]
bttv0: using tuner=-1
bttv0: registered device video0
input: USB HID v1.00 Mouse [Logitech USB-PS/2 Mouse M-BA47] on usb-0000:00:02.1-
1
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
bttv0: registered device vbi0
bttv0: PLL: 28636363 => 35468950 .. ok
bttv0: add subdevice "dvb0"
input: PC Speaker
NET: Registered protocol family 17
usb 1-3: new full speed USB device using ohci_hcd and address 3
drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 3 if 0 alt 1 pr
oto 2 vid 0x03F0 pid 0x1004
usbcore: registered new driver usblp
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
bt878: AUDIO driver version 0.0.0 loaded
bt878: Bt878 AUDIO function found (0).
ACPI: PCI interrupt 0000:01:04.1[A] -> GSI 5 (level, low) -> IRQ 5
bt878(0): Bt878 (rev 17) at 01:04.1, irq: 5, latency: 32, memory: 0xdc001000
DVB: registering new adapter (bttv0).
DVB: registering frontend 0 (Conexant CX24110 DVB-S)...
drivers/usb/serial/usb-serial.c: USB Serial support registered for Generic
usbcore: registered new driver usbserial_generic
usbcore: registered new driver usbserial
drivers/usb/serial/usb-serial.c: USB Serial Driver core v2.0
drivers/usb/serial/usb-serial.c: USB Serial support registered for PL-2303
pl2303 1-3:1.0: PL-2303 converter detected
usb 1-3: PL-2303 converter now attached to ttyUSB0
usbcore: registered new driver pl2303
drivers/usb/serial/pl2303.c: Prolific PL2303 USB to serial adaptor driver v0.12
ACPI: PCI Interrupt Link [LACI] enabled at IRQ 7
ACPI: PCI interrupt 0000:00:06.0[A] -> GSI 7 (level, low) -> IRQ 7
PCI: Setting latency timer of device 0000:00:06.0 to 64
intel8x0_measure_ac97_clock: measured 49993 usecs
intel8x0: clocking to 48000
lp: driver loaded but no devices found
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
apm: overridden by ACPI.
nvidia: module license 'NVIDIA' taints kernel.
ACPI: PCI Interrupt Link [LNK4] enabled at IRQ 12
ACPI: PCI interrupt 0000:02:00.0[A] -> GSI 12 (level, low) -> IRQ 12
NVRM: loading NVIDIA Linux x86 NVIDIA Kernel Module 1.0-7676 Fri Jul 29 12:58:
54 PDT 2005
agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
agpgart: Putting AGP V3 device at 0000:02:00.0 into 8x mode
agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
agpgart: Putting AGP V3 device at 0000:02:00.0 into 8x mode
end_request: I/O error, dev fd0, sector 0
achim@achim:~$ SLPB HUB0 HUB1 USB0 USB1 USB2 F139 MMAC MMCI UAR1
bash: SLPB: command not found
achim@achim:~$ ACPI: (supports S0 S1 S4 S5)
bash: syntax error near unexpected token `supports'
achim@achim:~$ devfs_mk_dev: could not append to parent for md/0
bash: devfs_mk_dev:: command not found
achim@achim:~$ md: Autodetecting RAID arrays.
bash: md:: command not found
achim@achim:~$ md: autorun ...
bash: md:: command not found
achim@achim:~$ md: ... autorun DONE.
bash: md:: command not found
achim@achim:~$ RAMDISK: Compressed image found at block 0
bash: RAMDISK:: command not found
achim@achim:~$ VFS: Mounted root (ext2 filesystem).
bash: syntax error near unexpected token `('
achim@achim:~$ Freeing unused kernel memory: 276k freed
bash: Freeing: command not found
achim@achim:~$ ReiserFS: hdc5: found reiserfs format "3.6" with standard journal
bash: ReiserFS:: command not found
achim@achim:~$ ReiserFS: hdc5: using ordered data mode
bash: ReiserFS:: command not found
achim@achim:~$ ReiserFS: hdc5: journal params: device hdc5, size 8192, journal f
irst block 18, max trans len 1024, max batch 900, max commit age 30, max trans a
ge 30
bash: ReiserFS:: command not found
achim@achim:~$ ReiserFS: hdc5: checking transaction log (hdc5)
bash: syntax error near unexpected token `('
achim@achim:~$ ReiserFS: hdc5: replayed 36 transactions in 2 seconds
bash: ReiserFS:: command not found
achim@achim:~$ ReiserFS: hdc5: Using r5 hash to sort names
bash: ReiserFS:: command not found
achim@achim:~$ Warning: /proc/ide/hd?/settings interface is obsolete, and will b
e removed soon!
bash: Warning:: command not found
achim@achim:~$ ReiserFS: hdc5: Removing [14188 143212 0x0 SD]..done
bash: ReiserFS:: command not found
achim@achim:~$ ReiserFS: hdc5: Removing [14188 143211 0x0 SD]..done
bash: ReiserFS:: command not found
achim@achim:~$ ReiserFS: hdc5: Removing [14188 143210 0x0 SD]..done
bash: ReiserFS:: command not found
achim@achim:~$ ReiserFS: hdc5: Removing [14188 143209 0x0 SD]..done
bash: ReiserFS:: command not found
achim@achim:~$ ReiserFS: hdc5: Removing [14188 143208 0x0 SD]..done
bash: ReiserFS:: command not found
achim@achim:~$ ReiserFS: hdc5: Removing [14188 143207 0x0 SD]..done
bash: ReiserFS:: command not found
achim@achim:~$ ReiserFS: hdc5: Removing [14188 143206 0x0 SD]..done
bash: ReiserFS:: command not found
achim@achim:~$ ReiserFS: hdc5: Removing [14188 143205 0x0 SD]..done
bash: ReiserFS:: command not found
achim@achim:~$ ReiserFS: hdc5: Removing [14188 143204 0x0 SD]..done
bash: ReiserFS:: command not found
achim@achim:~$ ReiserFS: hdc5: Removing [14188 143203 0x0 SD]..done
bash: ReiserFS:: command not found
achim@achim:~$ ReiserFS: hdc5: Removing [14188 143201 0x0 SD]..done
bash: ReiserFS:: command not found
achim@achim:~$ ReiserFS: hdc5: Removing [117199 140883 0x0 SD]..done
bash: ReiserFS:: command not found
achim@achim:~$ ReiserFS: hdc5: Removing [126540 127070 0x0 SD]..done
bash: ReiserFS:: command not found
achim@achim:~$ ReiserFS: hdc5: Removing [117199 84914 0x0 SD]..done
bash: ReiserFS:: command not found
achim@achim:~$ ReiserFS: hdc5: Removing [14246 14798 0x0 SD]..done
bash: ReiserFS:: command not found
achim@achim:~$ ReiserFS: hdc5: There were 15 uncompleted unlinks/truncates. Comp
leted
bash: ReiserFS:: command not found
achim@achim:~$ Adding 1052216k swap on /dev/hdc6. Priority:-1 extents:1
bash: Adding: command not found
achim@achim:~$ NTFS driver 2.1.22 [Flags: R/W MODULE].
bash: NTFS: command not found
achim@achim:~$ NTFS volume version 3.1.
bash: NTFS: command not found
achim@achim:~$ ACPI: Power Button (FF) [PWRF]
bash: syntax error near unexpected token `('
achim@achim:~$ ACPI: Sleep Button (CM) [SLPB]
bash: syntax error near unexpected token `('
achim@achim:~$ ACPI: Fan [FAN] (on)
bash: syntax error near unexpected token `('
achim@achim:~$ ACPI: Thermal Zone [THRM] (40 C)
bash: syntax error near unexpected token `('
achim@achim:~$ Linux Kernel Card Services
bash: Linux: command not found
achim@achim:~$ options: [pci] [cardbus] [pm]
bash: options:: command not found
achim@achim:~$ usbcore: registered new driver usbfs
bash: usbcore:: command not found
achim@achim:~$ usbcore: registered new driver hub
bash: usbcore:: command not found
achim@achim:~$ USB Universal Host Controller Interface driver v2.2
bash: USB: command not found
achim@achim:~$ ohci_hcd: 2004 Nov 08 USB 1.1 'Open' Host Controller (OHCI) Drive
r (PCI)
bash: syntax error near unexpected token `('
achim@achim:~$ ACPI: PCI Interrupt Link [LUBA] enabled at IRQ 7
bash: ACPI:: command not found
achim@achim:~$ PCI: setting IRQ 7 as level-triggered
bash: PCI:: command not found
achim@achim:~$ ACPI: PCI interrupt 0000:00:02.0[A] -> GSI 7 (level, low) -> IRQ
7
bash: syntax error near unexpected token `('
achim@achim:~$ ohci_hcd 0000:00:02.0: nVidia Corporation nForce2 USB Controller
bash: ohci_hcd: command not found
achim@achim:~$ PCI: Setting latency timer of device 0000:00:02.0 to 64
bash: PCI:: command not found
achim@achim:~$ ohci_hcd 0000:00:02.0: irq 7, pci mem 0xe0002000
bash: ohci_hcd: command not found
achim@achim:~$ ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus numbe
r 1
bash: ohci_hcd: command not found
achim@achim:~$ hub 1-0:1.0: USB hub found
bash: hub: command not found
achim@achim:~$ hub 1-0:1.0: 3 ports detected
bash: hub: command not found
achim@achim:~$ ACPI: PCI Interrupt Link [LUBB] enabled at IRQ 5
bash: ACPI:: command not found
achim@achim:~$ PCI: setting IRQ 5 as level-triggered
bash: PCI:: command not found
achim@achim:~$ ACPI: PCI interrupt 0000:00:02.1[B] -> GSI 5 (level, low) -> IRQ
5
bash: syntax error near unexpected token `('
achim@achim:~$ ohci_hcd 0000:00:02.1: nVidia Corporation nForce2 USB Controller
(#2)
bash: syntax error near unexpected token `('
achim@achim:~$ PCI: Setting latency timer of device 0000:00:02.1 to 64
bash: PCI:: command not found
achim@achim:~$ ohci_hcd 0000:00:02.1: irq 5, pci mem 0xe0003000
bash: ohci_hcd: command not found
achim@achim:~$ ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus numbe
r 2
bash: ohci_hcd: command not found
achim@achim:~$ hub 2-0:1.0: USB hub found
bash: hub: command not found
achim@achim:~$ hub 2-0:1.0: 3 ports detected
bash: hub: command not found
achim@achim:~$ ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 12
bash: ACPI:: command not found
achim@achim:~$ PCI: setting IRQ 12 as level-triggered
bash: PCI:: command not found
achim@achim:~$ ACPI: PCI interrupt 0000:00:02.2[C] -> GSI 12 (level, low) -> IRQ
12
bash: syntax error near unexpected token `('
achim@achim:~$ ehci_hcd 0000:00:02.2: nVidia Corporation nForce2 USB Controller
bash: ehci_hcd: command not found
achim@achim:~$ PCI: Setting latency timer of device 0000:00:02.2 to 64
bash: PCI:: command not found
achim@achim:~$ ehci_hcd 0000:00:02.2: irq 12, pci mem 0xe0004000
bash: ehci_hcd: command not found
achim@achim:~$ ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus numbe r 3
bash: ehci_hcd: command not found
achim@achim:~$ PCI: cache line size of 64 is not supported by device 0000:00:02. 2
bash: PCI:: command not found
achim@achim:~$ ehci_hcd 0000:00:02.2: park 0
bash: ehci_hcd: command not found
achim@achim:~$ ehci_hcd 0000:00:02.2: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004
bash: ehci_hcd: command not found
achim@achim:~$ hub 3-0:1.0: USB hub found
bash: hub: command not found
achim@achim:~$ hub 3-0:1.0: 6 ports detected
bash: hub: command not found
achim@achim:~$ Serial: 8250/16550 driver $Revision: 1.90 $ 14 ports, IRQ sharing disabled
bash: Serial:: command not found
achim@achim:~$ ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
bash: syntax error near unexpected token `('
.

Quantcast