Hoher SMART "Raw Read Error Rate" Wert
- From: Winfried Neessen <winfried@xxxxxxxxxxx>
- Date: Sun, 30 Oct 2005 22:52:45 +0100
Hi,
ich habe gerade mal die smartsuite auf einem meiner Server installiert
und ein (meiner Meinung nach) nicht sehr erfreuliches Ergebnis
bekommen.
Die Festplatte in dem System ist eine "ST310215A" und "smartctl -a"
gibt mir folgendes aus:
,----[ smartctl -a /dev/hda ]
| Vendor Specific SMART Attributes with Thresholds:
| Revision Number: 10
| Attribute Flag Value Worst Threshold Raw Value
| ( 1)Raw Read Error Rate 0x000f 081 061 025 241216436
| ( 3)Spin Up Time 0x0003 070 070 000 0
| ( 4)Start Stop Count 0x0032 100 100 020 32
| ( 5)Reallocated Sector Ct 0x0033 100 100 036 0
| ( 7)Seek Error Rate 0x000f 071 060 030 59143743
| ( 9)Power On Hours 0x0032 090 090 000 9525
| ( 10)Spin Retry Count 0x0013 100 100 000 0
| ( 12)Power Cycle Count 0x0032 100 100 020 290
| (194)Temperature 0x0022 033 046 000 33
| (195)Hardware ECC Recovered 0x001a 075 069 000 60802484
| (197)Current Pending Sector 0x0012 100 100 000 0
| (198)Offline Uncorrectable 0x0010 100 100 000 0
| (199)UDMA CRC Error Count 0x003e 200 200 000 0
| (200)Unknown Attribute 0x0000 100 100 000 0
| (202)Unknown Attribute 0x0032 100 253 000 0
`----
Muss ich mir bei den hohen Werten fuer "Raw Read Error Rate" und
"Seek Error Rate" sowie "Hardware ECC Recovered" Sorgen um meine Daten
machen?
Gruss
Winfried
.
- Follow-Ups:
- Re: Hoher SMART "Raw Read Error Rate" Wert
- From: Stephan Grossklass
- Re: Hoher SMART "Raw Read Error Rate" Wert
- Prev by Date: Re: Nachteile bei Mischbetrieb (SATA/IDE)?
- Next by Date: Re: Qualität von S-ATA-Kabeln
- Previous by thread: Platten abgraucht, neukauf aber was?
- Next by thread: Re: Hoher SMART "Raw Read Error Rate" Wert
- Index(es):
Relevant Pages
|