"Mxsmanic" <mxsmanic@xxxxxxxxx> wrote in message news:08vpi11p7v78vmehq3os9d422ied52jrur@xxxxxxxxxx > Does the USB connector to my Tungsten E also recharge the PDA, or is
> it recharged exclusively by the power adapter connection?
mine charges via USB, but much more slowly than on the PSU connection
you dont see any indication of the charging when it is going on via the
power indicator.
FWIW i think that there may be some cables / USB setups that dont provide
the power, but i havent seen that in practice.
>
> --
> Transpose mxsmanic and gmail to reach me by e-mail.
--
Regards
Re: UPS shutdown procedure ... Originally I connected by USB cable but started running out of USB ports so changed to serial port connection.... On further investigation I can see that the system 'should' shutdown the PC normally when the battery power kicks in. ... No warranty of any kind, either expressed or implied, is made in relation to the accuracy, reliability or content of this mail/post.... (microsoft.public.windowsxp.basics)
Re: External Drive Crashing ... AGAIN ... the USB interface is still not working properly. ... This makes me think that either the firewire cable is faulty ...power problem. ...connection that I have been using. ... (microsoft.public.windowsxp.help_and_support)
Re: Network Dropping ... the v2 and v3 are known to suck a lot of power.... can provide more power to the usb devices than any of the 6 ports on the ...ports on the front). ... Netgear wireless G USB card) drops the connection.... (alt.sys.pc-clone.dell)
Re: External HDD problem ... The Bytec adaptor comes with its own power supply that delivers this power via the MOLOX? ... But you are right, perhaps it is border line current draw causing the usb to drop connection, reconnect and drop connection again. ... I really got to get this solved since it is/was going to be used to backup an image of my laptop drive.... (microsoft.public.windowsxp.hardware)
Re: USB Hubs - question ... I don't plug in the Hub itself ... the Hub is plugged into a Mac's USB port... Most USB devices want their full power when plugged in and don't really ... comes across its USB connection to the Mac? ... (comp.sys.mac.hardware.misc)
