Re: Unable to finish Wifi hotsync on Palm TX

Hi,

I have an A7N8X motherboard and I had problems with my TX when I plug it to
the USB port of a cable, 2 or 3 meters long connected to the motherboard.
I have upgraded the BIOS...nothing better
I have solved the problem by pluging directly to the motherboard the hotsync
cable of the TX. Since then, hotsync is performed perfectly.

With all wifi possible failures, I will not try the hotsync that way.

For me, all works fine since several weeks...
Hope it will helps you
Frédéric

"Tragicm" <nothanks@xxxxxxxxxxx> a écrit dans le message de
news:Xns97191067EAB77nothankshotmailcom@xxxxxxxxxxxxxxxxx
> Hi all,
>
> I recently purchased a Palm TX and am loving all the features.
> Unfortunately, there seem to be a couple of issues (aren't there
> always?)
>
> 1. There appears to be a conflict with ASUS A7N8X motherboards and their
> USB ports. Too bad, as these are the superstar motherboards of
> yesteryear, (hence, what I chose when I built my computer 2+ years ago).
>
> Hmm, at least I hope that's it. Maybe I should check it with another
> computer I have lying around... multiconnector problem?
>
> 2. Being thwarted with the typical USB hotsync, I'm forced to go a lot
> fancier than I would have ever thought with a wifi hotsync. Worked
> great... once... out of ~50 times.
>
> I can get the Hotsync window to pop-up 100%. And ~70% of the time it
> will even proceed past "identifying user." Then it will intermittently
> choose a point to stop communicating. I've tried disabling some
> conduits in succession without much luck in pinpointing. I think the
> fact that it will initiate and then progress through much of the process
> means it's not a firewall/ad blocker issue. Rather for some reason the
> wireless connection just gives out. It has fully completed the process
> once, and only once.
>
> Granted, I have the ugly stepchild of wireless routers. Any other tips
> on troubleshooting? Perhaps some wireless router settings?
>
>
> Windows XP
> D-Link DI-514 Wireless router 802.11b
> Palm TX


.

Relevant Pages

  • Re: Is this computer problem fixable ?
    ... Look for any breakage or damage to the USB port that might still be causing ... It would appear that you have blown one or both of the micro fuses that supply power to the mouse/keyboard. ... Your motherboard may just have one fuse for all. ... Find an old keyboard and salvage the fuses from it and replace the fuses on the blown motherboard. ...
    (sci.electronics.repair)
  • USB wont recognize sophisticated devices.
    ... I have just replaced my hard drive and motherboard. ... Depending on which USB port I plug it into I am told either that the device ... the keyboard and mouse ports, ...
    (microsoft.public.windowsxp.hardware)
  • Re: Flash Drive Warning
    ... motherboard through the USB port. ... but happens on occasion. ... a mouse cable get pinched and sliced in a sliding keyboard drawer slide on a computer stand and heard a zzzzzzt! ... But after reading a number of sites about USB caused motherboard failures,,, I'll be more careful in the future. ...
    (alt.machines.cnc)
  • Re: Unable to finish Wifi hotsync on Palm TX
    ... I usually plug it into the extended USB ports ... > I have an A7N8X motherboard and I had problems with my TX when I plug ... > hotsync cable of the TX. ...
    (comp.sys.palmtops.pilot)
  • Re: Unable to finish Wifi hotsync on Palm TX
    ... maybe the BIOS upgrade will help? ... >> I have an A7N8X motherboard and I had problems with my TX when I plug ... >> hotsync cable of the TX. ... Can you borrow a powered USB hub from somewhere? ...
    (comp.sys.palmtops.pilot)