Re: Computer not accepting DVDs
In article
<3fa98666-cd94-4da2-99ff-b630629069d6@xxxxxxxxxxxxxxxxxxxxxxxxxxx>,
macman <macloverg@xxxxxxxxx> wrote:
Hello,
I have a Late June 2005 Power Mac G5 with a superdrive, and whenever I
put DVDs in the tray, it attempts to read the DVD and after a few
minutes, it spits out the disk... will re-installing OS X fix this
problem or is it a hardware issue?
Similar symptoms with my wife's iMac (intel) and some time earlier
TiBook were caused by failed drives. AppleCare is good.
.
Relevant Pages
- Re: Which DVD player with HDMI?
... I'm looking for recommendations for HDMI equipped DVD players. ... looking for the best connection for my existing DVDs. ... Only ones I've seen are the Samsungs but ... It seemed to be the ideal player, but the tray wouldn't open properly after it had been on for more than 10 minutes and it wouldn't recognise .mpg files over 2Gb in size. ...
(uk.media.dvd) - OT: Autoload DVD burner for PC
... I'm looking for RECOMMENDATIONS for an autoload DVD burner that can hold at least 100 Blank DVDs in its input tray and at least 100 burned DVDs in its output tray for use on a Windows XP PC. ...
(comp.sys.hp.mpe) - Re: LG DR 385 DVD recorder
... This occurs with commercial DVDs, to read it, and with blank ... rejecting, the DVD remains inside the recorder and can be read or recorded ... microswitch detecting the tray position? ... slipping at the end of the loading cycle. ...
(sci.electronics.repair) - Re: LG DR 385 DVD recorder
... This occurs with commercial DVDs, to read it, and with blank ... My guess would be a mechanical problem with the tray not fully loading. ... What happens if you eject and then insert a DVD AFTER it has successfully ...
(sci.electronics.repair) - Re: Computer not accepting DVDs
... put DVDs in the tray, it attempts to read the DVD and after a few ... work - got rid of suspicion of bad cable ... Put known good drive and good ATA cable and the drive worked - got rid ...
(comp.sys.mac.system) |
|
