Post subject: Re: still trying to open up/forward ports on



Similar issue:

DSL Line>DSL Modem (with fixed IP)>Airport Express (with fixed
IP)~~~~~~(WIRELESS)~~~~~~~~~iMac

I use Personal web sharing from my iMac but the address it has is
10.0.0.2 as distributed by the AX....

I have been told to use port forwarding of port 80 and this will
allow my personal site to continue to be delivered at the IP address
of the AX...

????

The DNS of 10.0.1.1 will only work if your AirPort unit has DNS
entries from the DHCP server at your ISP. Since your PowerBook was
able
to get online through DHCP I'm assuming this is working out okay -- so
> I thought I would just like to point that out just in case.
> The DNS of 10.0.1.1 will only work if your AirPort unit has DNS
> entries from the DHCP server at your ISP. Since your PowerBook was
> able
> to get online through DHCP I'm assuming this is working out okay -- so
> I thought I would just like to point that out just in case.


* posted via http://www.mymac.ws
* please report abuse to http://xinbox.com/mymac
.



Relevant Pages

  • Re: Domain authentication problem
    ... configuration of Dynamic DNS, hence updates now enabled. ... restarting DHCP server restores this as default after I ... modern Windows versions where clients can register their own IP ...
    (microsoft.public.windows.server.networking)
  • Re: Constant "Acquiring Network Address" status; No IP address fro
    ... Look at the DHCP server event log for more info on this error" ... Nothing in the logs show ... "Mathieu CHATEAU" wrote: ... DNS update may file if there is a dns ownership issue. ...
    (microsoft.public.windows.server.networking)
  • Re: Networking between Irix and Osx
    ... Is your router a DHCP server? ... My router is a DHCP server and my G5 was already configured to ... keep networking information (ip, dns,etc.) from it. ... In the panel Modify Network Settings on Iris, i also try to write the ...
    (comp.sys.sgi.admin)
  • Re: Multiple PTR records wont go away in the reverse zone.
    ... What about the DHCP setting "Dynamically update DNS A and PTR records only ... if requested", so clients will specify. ... I do agree with all your DHCP server recommendations (especially entering ... there is no other reason for a client to register in DNS when off ...
    (microsoft.public.windows.server.dns)
  • Re: Update 2003 DNS with non-domain member clients
    ... I noticed there wasn't a subnet created in AD where the non-domain members PC ... Where SHOULD I see the update if the client isn't part of ... I have the DHCP handing out the DNS suffix to non-domain members ... Changed my DHCP server to 'Always dynamically update DNS A and PTR ...
    (microsoft.public.windows.server.dns)