Re: High Power USB hub port...
- From: "BillW50" <BillW50@xxxxxxx>
- Date: Fri, 31 Aug 2007 06:12:58 -0500
In news:46d66e4e$1_1@xxxxxxxxxxxxxxxxxxxxxx,
M.I.5¾ typed:
That is not actually quite correct. The USB spec requires a port to
supply a minimum current of 100 mA. Anything larger is entirely by
negotiation with the host and will only be available if the power
supply can support it once the other loads are accounted for. In
general terms, this usually means that USB ports on desktop machines
can deliver 500 mA. Also ports on self powered hubs can generally
deliver 500 mA. However, ports on non powered hubs are usually
limited to 100 mA. Some laptops also limit the current on their
ports to 100 mA.
Also note that according to the USB spec., 500 mA is specified as a
maximum not a minimum. Although most ports will, in practice,
deliver a bit more than 500 mA, they shouldn't deliver much more
before the overcurrent protection kicks in. Any port designed to
deliver more than 500 mA (and I know that do exist) are strictly
non-compliant.
I've seen some USB powered 2½ inch external hard drives that actually come with two USB plugs. The extra one taps into extra 5VDC so it doesn't overload using a single USB port.
--
Bill
.
- Follow-Ups:
- Re: High Power USB hub port...
- From: SMS
- Re: High Power USB hub port...
- References:
- High Power USB hub port...
- From: Al Gillis
- Re: High Power USB hub port...
- From: SMS
- Re: High Power USB hub port...
- From: M.I.5¾
- High Power USB hub port...
- Prev by Date: Does anyone remember the Panasonic CF-35 Toughbook?
- Next by Date: Re: Best Buy, Circuit City Reps Pressure Consumers to Buy Unnecessary Recovery Discs
- Previous by thread: Re: High Power USB hub port...
- Next by thread: Re: High Power USB hub port...
- Index(es):
Relevant Pages
|