Re: Wireless security? ? ?



Is everyone's neighbor a hacker?
Mabbe the only thing for you to do is to rename te SSID and close
SSID's broadcast.

Barry Watzman wrote:
Basically, you have to turn on encryption. There are two major classes
of encryption offered, WEP (older and less secure) and WPA (newer and
far more secure). While WEP can be broken by a knowledgeable hacker,
breaking is still difficult and is far beyond the capabilities of even
most fairly knowledgeable computer USERS (users, not hackers or
programmers). WEP is "good enough" for most private residential users,
but if your hardware supports both WEP and WPA (and most anything sold
in the past 2 years does), then use WPA. Otherwise, WEP is still a
couple of orders of magnitude better than nothing.

Now for the bad news: Setting up encryption can be quite difficult,
especially if you have a mixed vendor environment (e.g. your router and
your wireless network card were not all made by the same company). In
my experience, most typical end users fail and need professional
assistance to convert their network into an encrypted network. There is
a fair amount of configuration required for every computer using the
encrypted network, and most of it is way beyond the understanding of
most end users. Further, the exact procedure is slightly different for
each brand of product (it's slightly different for Linksys vs. D-Link,
for example), so it's impossible to give exact, step-by-step instructions.


Ray wrote:
Recently I read in the New York Times that large numbers of people are
secretly piggy-backing on their neighbors' wireless networks.

I use a wireless system -- a desktop with two laptops. I am certain that the
person in the next apartment could connect, without my knowing it.

I understand there's a way to prevent this, but I've never seen a
one-two-three step instruction on how to do this.

Can anyone tell me? Emphasize once more, one-two-three steps.



.



Relevant Pages

  • Re: Wireless security? ? ?
    ... While WEP can be broken by a knowledgeable hacker, ... Setting up encryption can be quite difficult, ... your wireless network card were not all made by the same company). ...
    (comp.sys.laptops)
  • Re: HP2210 w/Linksys WCF54G wifi card (JC)
    ... the WEP settings are virtually identical...ie. ... "Jeff Cunningham" wrote in message ... Yes I am using WEP 128bit encryption. ... When I check one of the profiles, no "Network name" shows up and I ...
    (microsoft.public.pocketpc.wireless)
  • Re: Wireless security? ? ?
    ... There are two major classes of encryption offered, WEP and WPA. ... While WEP can be broken by a knowledgeable hacker, breaking is still difficult and is far beyond the capabilities of even most fairly knowledgeable computer USERS. ... WEP is "good enough" for most private residential users, but if your hardware supports both WEP and WPA, then use WPA. ... Setting up encryption can be quite difficult, especially if you have a mixed vendor environment (e.g. your router and your wireless network card were not all made by the same company). ...
    (comp.sys.laptops)
  • Re: securing my new wireless router
    ... Basics for secure wireless computing. ... Enable WEP encryption. ... connect to your network. ...
    (Security-Basics)
  • Re: 128 bit WEP encryption
    ... Your adapter may require a driver upgrade to attain 128-bit WEP capability. ... How to Make Your 802.11b Wireless Home Network More Secure ... | I am trying to set up WEP 128 bit encryption for my wireless network using ...
    (microsoft.public.windowsxp.security_admin)