Re: Can I add DDR2 memory stick?

>Yep, the "key" in the socket is in a different location. You cannot
>plug the wrong one in. Well, unless you use a big hammer. :-)

>
>DDR and DDR2 are not "single and dual channel" memory. They are totally
>different types of memory ... as different as SDRAM and DDR. Not only
>can you not mix them, but as far as I know, a machine made for one
>(either one) won't take the other, at all, period.

What ever you people are thinking....I don't know if you really applied
those ideas of yours but I understand DDR and DDR2 are incompatible.
But ..I really replaced one of the 256 MB with one 512Mb making the
total memory to to768 MB and my applications where larger memoryworks
better...

.

Relevant Pages

  • Re: Which memory upgrade ?
    ... There are 4 available memory slots. ... The motherboard specification says that it will support both DDR and SDRAM memory, with a maximum capacity 2GB DDR or 2GB SDRAM, thus: ...
    (microsoft.public.windowsxp.hardware)
  • Re: Bad Memory ?
    ... The motherboard does support both SDRAM & DDR. ... | compatible memory. ...
    (microsoft.public.windowsxp.hardware)
  • Re: Which FPGA and memory to use? The eternal X vs. A question.
    ... so I got the Spartan 3E "starter kit" that comes with DDR SDRAM. ... Unfortunately I can't make the memory work using the core generator. ... A 32x16 memory uses 16 slices in a Xilinx ...
    (comp.arch.fpga)
  • Re: SDRAM TO DDR
    ... to DDR 184 pin 266MHz. ... I removed SDRAM from board and inserted the new ... memory over the other. ... If there is a problem with the new RAM, ...
    (microsoft.public.windowsxp.hardware)
  • Re: SDRAM TO DDR
    ... I removed SDRAM from board and inserted the new DDR 2 sticks of 512mb this would give me the board max fitted of 1GB. ... memory over the other. ... If there is a problem with the new RAM, ...
    (microsoft.public.windowsxp.hardware)