Re: setting up the "blanc" wireless router

"bhushan" <bagibh@xxxxxxxxxx> top-posted:
>As requested for more info, here it is:

One of the requested information bits was the manufacturer and model
number of the router.

>I connect a cable from modem to the WAN port

What kind of modem are we talking about? Cable modem? DSL modem?
Something else?

What part of the world are you in? Who is your ISP?

>Regards,
>Bhushan
>Off: 765-4464
>Res: 321-1649

Area code? Country code?
.

Relevant Pages

  • Re: [OT] PC Network Help Needed Please
    ... Let me know the model of your modem and router and I ... You'll need to connect from the WAN port on the router to the ethernet jack on the DSL modem. ...
    (rec.pets.cats.anecdotes)
  • Re: fax services - cannot send faxes to area code setup in modem properties
    ... In phone and modem options, "new location" was set to our area code. ... You said "I cannot send faxes from any connected workstations and the ... Microsoft CSS Online Newsgroup Support ...
    (microsoft.public.windows.server.sbs)
  • Re: Telewest Cable to a Router & 2 PCs?
    ... >>Yes it is an ADSL modem, but I am not using the WAN port on the router, ... >>signal from the SB5100 modem. ... You absolutely must use the WAN port for the modem, ...
    (uk.telecom.broadband)
  • Re: Help with shield router
    ... The Modem is at 192.168.1.254, ... I had this setup working previously with a prior modem. ... So the current setting are with the wan port of router 1 connected directly to the modem. ... If your Modem is a Modem/Router you have to configure one Wireless Router to functions as a Switch with an Access Point and then plug the output of the Modem/Router and a second Router through its WAN port to the switch of the Router that functions as an Access Point. ...
    (microsoft.public.windowsxp.network_web)
  • Re: Router or Modem DHCP
    ... >>My router is connected via WAN port by cable to the modem. ... > Only one dhcp server. ...
    (microsoft.public.windowsxp.network_web)