Re: Accessing data on Acernote light

"LilaDuncan" <LilaDuncan@xxxxxxxxx> writes:
> > if it has an ethernet connection, put it on your network and access the
> > files that way.
>
> Thank you for the suggestions but:
> No Ethernet

Put in an ethernet pc card. They are dirt cheap.
.

Relevant Pages

  • problem starting up Fedora on an IBM Thinkpad 600E using Xircom card
    ... Redhat Fedora working on my laptop. ... >> ethernet after booting. ... > network service before the pcmcia service. ... > card is recognized then you should be able to use it for networking. ...
    (comp.os.linux.setup)
  • Re: cPCI Hotplug support
    ... Card: Zynx ZX412 dual 10/100 card and DEC/Intel 21143 chipset ... media: Ethernet autoselect ... vendor = 'Digital Equipment Corporation' ... But these drivers don't work for me. ...
    (freebsd-current)
  • only first PCMCIA card works
    ... card is plugged on the first PCMCIA slot and I inserted my FC card ... second slot, be it ethernet card or FC card adapter, doesn't work. ... # Power management support ... <Parallel port bus> on ppc0 ...
    (freebsd-questions)
  • Re: 3Com 3C05 adapter on 43P running 4.3
    ... > card out, and the ent0 PCI adapter still shows up. ... So the on-board adapter goes through the PCI ... device driver for the OS to make it usable. ... ethernet card, or get a different ethernet adapter... ...
    (comp.unix.aix)
  • multiport ethernet cards
    ... going to buy a spare PCI ethernet card. ... except on Ebay (where I can now only see one two port card). ... These two multiport ethernet adapters deliver excellent performance at ...
    (Debian-User)