Re: How to tell DP35DP BIOS version before buying CPU?


Bob Bailin;946987 Wrote:
"Jack D" Jack.D.2845106@xxxxxxxxxxxxxxxxxx wrote in message
news:Jack.D.2845106@xxxxxxxxxxxxxxxxxxxxxx

Bob Bailin;946747 Wrote:-
"Jack D" Jack.D.281054b@xxxxxxxxxxxxxxxxxx wrote in message
news:Jack.D.281054b@xxxxxxxxxxxxxxxxxxxxxx

John Doe;945540 Wrote:-
Jack D Jack.D.27b1698@xxxxxxxxxxxxxxxxxx wrote:
-
I paid $104. I also figured out how to flash the BIOS using a
bootable ISO CD from Intel's website. Without even loading the OS,
I now have the latest (0413) BIOS, my CPU now shows 3.0Ghz and 4GB
of ram. I thought I would have problems using this old BIOS (0293)
but it did stay stable until I updated. Now I can feel a little
better about loading Windows Vista with a current BIOS. Thank you
for your help. JackD-

So 0293 did recognize your CPU, just not every function of your CPU.-

Yea, glad it worked out the way it did.
Maybe you or anyone reading this could help me on this question. I
have
a single SATA HD that I want to load Windows on. What would I set it
to
in the BIOS to install Windows? There is a Drive Configuration menu
that says configure SATA as... IDE, RAID or AHCI. Mine is set to IDE.
Also there is a setting for ATA/IDE Configuration. Disable, Legacy,
or
Enhanced ( or Native). Mine is set to Legacy but wondering if it
should
be set to Enhanced (native) The HD is a Seagate 250GB SATA HD.
Thanks!-

Which version of Windows are you trying to install? Vista has native
support
of both SATA and the Intel RAID ICH9 and earlier chips. If you're
installing
Vista, change the setting to RAID if you think there's some
possiblity
in the
future you'll want to setup a RAID array (it's future-proofing your
installation;
there's no requirement to ever actually setting up a RAID). AHCI is
native
SATA support without the RAID option. If you'll never, ever use RAID,
use this option, as it will eliminate the RAID status screen during
POST.

XP SP3 and earlier Windows installations require F6 drivers for SATA
and
RAID. If you set the SATA to emulate IDE you won't need these
drivers.
If you use IDE emulation, Enhanced would work best with XP, but older
Windows versions might only recognize Legacy, which may limit you to
137GB drives or smaller.

I would tend to believe that native SATA support runs faster than IDE
emulation on either XP or Vista.

Bob-

Hey thanks Bob for your response!


Which version of Windows are you trying to install?
Windows Vista Home Premium x64

No possibility of running RAID. Just a single HD.

My HD supports SATA 3.0 and there's a jumper you can pull off so that
the HD runs at 3.0gb/s but I don't think it can...yet. If you leave
the
jumper attached, then it runs at 1.5gb/s or something like that. Mine
is
off.
So you're saying I should set the "CONFIGURE SATA as...AHCI? If I
change it to that, you can't set it back to IDE, can you? Will I
benefit from increased performance from the HD using AHCI?
Jack-

Yes, set it to AHCI. No, you can't set it back to IDE without getting
a
STOP 0x7b error when next booting Vista due to the missing IDE driver.
Yes, there should be increased performance using the native SATA AHCI.

Please be aware that you *may* run into a problem using 4GB of ram
with
Vista 64. It installs just fine, even after the reboot during
installation, but
subsequent boots take *much* longer, on the order of 2-10 minutes just
to get to a working desktop. The most recent BIOS is supposed to
finally
fix this problem, but if it doesn't, there's a simple fix, so don't
worry.

Bob

I've heard about the ram problem with some people. I have installed via
ISO CD the latest BIOS (v0413) so I think I have it covered. Also ran
Memtest on the 4gb's of ram 6 passes without an error. Even did each
stick individually. No errors. Some posters did the single ram stick in
the board, then loaded the OS and after it was installed and a BIOS
update, installed the 2nd stick then all was well.
Would there be any problems with my SATA CD/DVD if I use AHCI? When I
did the update thing using the ISO CD, I found out that the setting in
the BIOS was set to RAID. When I changed it to IDE, then the SATA CD
loaded the BIOS that was on the disk. Had it been set to AHCI would it
still have worked? Just don't want any conflicts so trying to cover as
many "bases" as I can! Thanks Bob!
Jack




--
Jack D
.

Relevant Pages

  • Re: How to tell DP35DP BIOS version before buying CPU?
    ... I now have the latest BIOS, my CPU now shows 3.0Ghz and 4GB ... a single SATA HD that I want to load Windows on. ... IDE, RAID or AHCI. ... Which version of Windows are you trying to install? ...
    (comp.sys.intel)
  • Re: RAID Setup and DP35DP?
    ... BIOS 0262 "removed floppy menu screen for boards that don't support it" ... ... Thus I want to specify RAID now in the BIOS as Intel strongly recommends, ... All this I did OK last week with a Vista install, but that week taught me that I strongly want to be running WinXP instead. ...
    (comp.sys.intel)
  • Re: How to tell DP35DP BIOS version before buying CPU?
    ... I now have the latest BIOS, my CPU now shows 3.0Ghz and 4GB ... a single SATA HD that I want to load Windows on. ... IDE, RAID or AHCI. ... Mine is set to IDE. ...
    (comp.sys.intel)
  • Re: Installing Windows XP on SATA HDD
    ... A couple of possibly related items about SATA and RAID: ... Install drivers from floppy via F6. ... I copied only the drivers to a floppy. ...
    (microsoft.public.windowsxp.hardware)
  • Re: Slipstream RAID drivers for DP35DP mb WinXP install?
    ... Now, under WinXP, the BIOS upgrade is merely executing the downloaded file and watching things run for two minutes ... ... my question is whether that can be done without RAID/SATA drivers on a floppy (are there native SATA drivers in WinXP SP2 install disk?)? ...
    (comp.sys.intel)