Re: Dynex 2-Port USB 2.0 PCI Card sucks chrome from a trailer hitch?

Hi!

Maybe PCI 2.1 is 3.3V only?

I don't know, but I used a Linksys LNE100TXv5 PCI Ethernet card in a
486-based PCI/EISA PC Server. The instructions and driver software
made it very clear that the board was for use in systems that
supported PCI 2.1 only. The board was very reliable and never gave me
any trouble.

Somehow I doubt the Micronics M4Pe is PCI 2.1 compliant...

William

.

Relevant Pages

  • Problem in Sharing one D1000 Storage Box between two Sun Solaris Serve
    ... I am facing one small problem in attaching the storage to ... between two Sun servers) ... to attach the Storage to Second Sun server --> ... PCI 33 ...
    (SunManagers)
  • Same Panic 12 on differnet servers
    ... The first server is Compaq Proliant DL380G2: ... Pentium Pro MTRR support enabled ... pcib1: on motherboard ... # The `bpf' pseudo-device enables the Berkeley Packet Filter. ...
    (freebsd-stable)
  • Re: PCI Compliance Scope
    ... Logging is a PCI requirement. ... So your log servers are in scope so the ... The log server is a "connected" system and by PCI definitions it is ... not contain any unauthorized data (cardholder data, ...
    (Pen-Test)
  • Re: OT HP Netserver Hardware Issue
    ... I cleaned out the server using compressed air. ... FreeBSD a useful commentary on the RealTek cards. ... * Supports several extremely cheap PCI 10/100 adapters based on ... Because we don't know where within this region received packets ...
    (comp.unix.sco.misc)
  • Fedora Core 5 on Compaq Proliant 2500
    ... I was given a Compaq Proliant 2500 server and a Compaq Storage System ... My goal is to install Fedora ... work and my only installs have been on desktops with IDE drives. ... PCI: PCI BIOS revision 2.10 entry at 0xf0068, ...
    (linux.redhat.install)